Ender3-sidecover.stl

Linear_X_kitV3.stl

Linear_X_kit.stl

Ender3Pro_partcooling.stl

fanduct-2.stl

Ender3Pro_LinearY.stl

Y-Axis-linear.stl

Ender 3 Zero Y Offset BLTouch Mount

Ender3_ZeroY_BLTouch_Mount.stl

Ender 3 V2 Runout Sensor Filament Guide - Fully Printed

Filament Guide.stl

Ender3-Pro-hummingbirdV3.stl

all-in-one.stl

Grifinity Ender3 tool holder

Grifinity Ender3 tool holder.stl

Creality Ender 3 pro Main board case with bigger hole for Noctua fan.obj

Main board cover with hole to fit the totally worth bigger and far more silent Noctua NF-A8 FLX fan.

Main board case with hole for Noctua NF-A8 FLX fan.obj

Ender 3 Pro riser feet

I don't even remember when I designed these.
I know I used to keep my printer on a yoga mat so it would make less noise before I did all the silent mods. The printer would sink into the yoga mat, barely letting the bottom fan breathe. Don't really need them anymore, but I still use them.

They are designed to fit into the included rubber feet on the Ender 3 Pro.
Since there is only one model, you'll need to mirror two of the feet on the slicer for them to be symmetric.

spider_cr_touch_mount.stl

Some Creality Spider hotends are slightly taller than the standard one. This spacer combined with 2 M3x10 or 12mm screws are used to extend teh reach of the CR touch to fit these new hotends.

I suggest using ASA or similar filament, 100% infill. No support needed but a brim is helpful.

NOTE! Still in development! Changes may occur.

Ender 3 Pro Dual Spool Filament

Keep 2 Spools of filament on your printer. This replaces the small ring that holds the single one on the mounting bracket. Works perfectly on my Ender 3 Pro. 

HMG7.2 ADXL345 22.5mm Horizontal Mount.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**


 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**


Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.


So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 


If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.


If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com


If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Ender 3 Pro Business Card Holder

This is a business card holder in the shape of an Ender 3 Pro 3D Printer.
It is a creative and fun way to display your cards on your desk or counter. The printer design shows your passion and skill for 3D printing and makes your workspace stand out.
It can hold up to 20 standard-sized cards. This model is perfect for anyone who works in 3D printing, design, engineering, or any other tech-related business. It can also be a great gift for your clients or colleagues who are into 3D printing.
Download this model today and enjoy the coolness of an Ender 3 Pro 3D Printer on your desk!😎
Make sure to use supports and a thin layer height to preserve all the details of this model 🙌

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

2023 - Ender 3 Filament Guide With Roller

I made this because I prefer the way Filboyt's (https://www.thingiverse.com/thing:2917932) connects to the frame, as it doesn't obstruct any other accessories. However, it does create a lot of friction, so I combined it with Tomaskom_cz's (https://www.thingiverse.com/thing:3095575) filament guide.

Ender 3 - Filament guide with roller.stl

Ender 3-Pro Dual Gear Extruder offset.stl

This was designed to overcome the z rod conflict with most Dual Gear Extruders on some Ender 3's, but mostly Ender 3 Pros. 

This is a work in progress! I will update as I do more testing, pictures to follow.

Tool Storage for Ender 3 Pro on top of Power Supply PSU.

A minimal storage are for the necessary tools needed for your printer. Has storage for a USB drive, Hotend Cleaner, Spatula/Scraper, and tweezers.

The print uses a small piece of foam that came with the printed for the hotend cleaner. The foam is used to store the hotend cleaner and to keep a snug fit for the storage piece and PSU.
If you do not have the foam you can use a piece of cloth. 
The spacing for the PSU is a little larger than need in order to fit the foam/cloth for a snug fit, if you do not have foam, you can fold a piece of paper and place it there or downsize this area of the print.

Bed Handle for Ender 3 

bed_handle_left.STL

Flush Cutter Holder for 20x20 Extrusion, Ender 3

flush cutter holder rounded edges.STL

Ender 3 Pro Nozzle Wipe Attachment

Brush:
I used a cheap harbor freight brass brush and cut the handle off. Don't use a bristle type that is harder than your nozzle, aka steel brush with brass nozzle.

 

Notes:
You will need to slide your display over to accommodate the holder, you can either relocate the display or simply move the display mount over by one screw slot.

 

Print Settings:
Supports: None
Infill: Gyroid or higher strength one.
Layer Height: 0.2mm
 
Wipe GCode:
Coming soon.

Ender 3 pro

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ender3-sidecover.stl

Linear_X_kitV3.stl

Ender3Pro_partcooling.stl

Ender3Pro_LinearY.stl

Ender 3 Zero Y Offset BLTouch Mount

View 12 new models

Ender3-Pro-hummingbirdV3.stl

Grifinity Ender3 tool holder

Creality Ender 3 pro Main board case with bigger hole for Noctua fan.obj

Ender 3 Pro riser feet

spider_cr_touch_mount.stl

Ender 3 Pro Dual Spool Filament

View 510 new models

Ender 3 Pro Business Card Holder

2023 - Ender 3 Filament Guide With Roller

Ender 3-Pro Dual Gear Extruder offset.stl

Tool Storage for Ender 3 Pro on top of Power Supply PSU.

Bed Handle for Ender 3

Flush Cutter Holder for 20x20 Extrusion, Ender 3

Ender 3 Pro Nozzle Wipe Attachment