Distress Oxide Pad Holder 4 Slot

DistressMiddle-x4slots.stl

Elephant Coaster

Elephant Coaster.stl

Classic Tron Logo Coaster

Classic Tron Logo Coasters.stl

Nuvo Stand Set of 6- Complete.stl

Nuvo stand holder to fit standard bed printers. It has one less holder 

ATG Stand

Created this little stand for the Scotch Advanced Tape Glider (ATG).  Affectionately known to the Scrap-booking community as the ATG Gun. This has a small footprint so as to not take up precious space on a Scrapbookers desk.  The ATG rests neatly inside for quick retrieval and storage. 

CraftWoman Name Plate

Wife got a Craftsman Tradestack tool box for her birthday to take her equipment to Craft Retreats. Just seems appropriate to re-tag the boxes with this. There is a image attached with the layer height settings for Printing the Black, Red, then White. 



CraftWoman

Lego_4x6_Signature_Plate.stl

This a 4x6 Lego plain plate to print for signatures. In the photo my son had gotten Lou Ferrigno on an official plate and the studs on top limited the amount of signature space. So we made this version with no studs and it fits official lego for display purposes.

PowderPuff Ink Pad Holder

This was designed to hold 2 PowerPuff Ink Stamps per row. 

Funko Wall Mount Standalone Stage

This is a remix of https://www.thingiverse.com/thing:5251016. This has a center hole for mounting. 

Stage.stl

Funko Wall Hex Wall storage Wall Mount

Do Not Disturb the Crafter

DoNotDisturbtheCrafter.stl

Honey Bee Yourself!

Honey Bee.stl

Distress Oxide Ink Pad Holder Bookcase

DistressMiddle.stl

Nuvo Stand-Bag Insert

This is a standalone stand or bag insert for a Totally Tiffany bag. Examples of usage are in the attached photos. 

Tropical Flamingo Santa Decoration

Hula Tropical Santa.stl

Team Twizzlers Sign

Team Twizzlersv2.stl

Ender 3-Pro Dual Gear Extruder offset.stl

This was designed to overcome the z rod conflict with most Dual Gear Extruders on some Ender 3's, but mostly Ender 3 Pros. 

This is a work in progress! I will update as I do more testing, pictures to follow.

Easter Bunny Stencil

Bunny Stencil.stl

Ink-pad Holder with Heart Cutouts

CTMH_InkPadHolderv3withHearts.stl

1inch PVC Filament Guide.stl

I am building a 1" rack to hold filament and wanted a way to guide the filament. This is a remix of EwanLejkowski's - Creality Ender 3 Pro spool stop clip https://www.thingiverse.com/thing:4281109.  The end was squared off and a 3mm hole was cut out for the filament to feed through.

1inch PVC Roller.stl

I am building a 1" rack to hold filament and wanted a way for the filament to roll on the rack. I think eventually I may switch to a TUSH. However, this was faster to get my rack up. 

Revolver_Ring.stl

This is a ring that can be used with the Revolver Caddy on thingiverse, thing https://www.thingiverse.com/thing:2997593.  The base does not print with a way to hold the revolver caddy in place if you pick it up. There are two ways to use the ring.  Print and Glue after attaching the caddy.  Or in your slicer attach as a part, align and attach the ring at the very top of the base stl. Then in your slicer add a pause command at approx layer 77. This will give you a chance to remove the caddy from your print bed if you are printing on the same bed (Otherwise print the items separately but wait to print the base until the Caddy is finished. Then add lubricate per thingiverse instructions then place on the base. Resume your printing and then the ring will print in place and finish of the print nicely with a way to lift the unit without separating.

HEX Medium Shelf Bases

This was a remix of https://www.thingiverse.com/thing:5539285

HEX_Medium_shelf_base_single.stl

HEX_Medium Shelf_Veneer_2-Piece_Pos_Neg.stl

This was designed to fit https://www.thingiverse.com/thing:4789872
It is designed to just slip on the far right and left of the shelf used for minifig display. Post printing there is a small remnant on the point that I just snipped off. 

Batman Ender 3 or Pro LCD Knob

We are big super hero fans. So we decided to make a new control knob for each of our printers. Tested on Ender 3 and Ender 3 Pro.  Printed at layers 
0-5 Black
6-8 Yellow
9+ Black

Batman LCD Knob

Fantastic Four Ender3 or Pro LCD Knob

We are big super hero fans. So we decided to make a new control knob for each of our printers. Tested on Ender 3 and Ender 3 Pro.  Printed at layers 
0-5 White
6-8 Blue
9+ Blue.
We printed them face down. So their was no need for supports. 

XMen Ender 3 or Pro LCD Knob

We are big super hero fans. So we decided to make a new control knob for each of our printers. Tested on Ender 3 and Ender 3 Pro.  Printed at layers 
0-5 Blue
6-8 Yellow
9+ Blue.
We printed them face down. So their was no need for supports. 

Avengers Ender 3 or PRO LCD Knob2

We are big super hero fans. So we decided to make a new control knob for each of our printers. Tested on Ender 3 and Ender 3 Pro.  Printed at layers 
0-5 Red
6-8 Black
9+ Black

Front Door Hanger wrought iron insert

We had a wrought iron insert put in our front door. This left use with no way to hang wreaths or swag from the door. Without the use of Bungee cords and the like. So we decided to a whip up a make shift bracket. That works very well. 

Ikea Olle Storage Hanger.stl

This was our first build. Had an Olle Lundsberg Design Garage Hanging system that came with the house and since IKEA no longer supports this system. I needed a few more hooks, so we (my son did the majority of the design in AutoCAD) and viola working hooks. The photos show the original discontinued hook on the left and the newly designed hook on the right. 

Just an IT guy that likes to play with 3d Printing. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

AmazinPistolPete

Achievements

Seedling

Trailblazer

Up and Coming