Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget 

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: Coming Soon
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake - Articulated Snap-Flex Fidget 

Dragon Tree Lamp

Lamp Body.stl

Remix of Blank Can Cup RETURNS! - Dragon!

Blank_16oz_Can_Cup_RLY_V1.step

Shakaworld3d 4 Faced Monkey Squid

Shakaworld3d 4 faced Monkey Squid V2.stl

Shakaworld3d 4 faced Monkey Squid V1 Challenge

This is the articulated print in place flexi 4 faced MonKey Squid - just a Challenge to see how fast and clean this print can be printed.

Baby Basilisk (Short) - Articulated Snap-Flex Fidget 

This baby basilisk just can't wait to be king of the serpents.  Until then, he's content to lounge about and strike a pose for you and your friends.

This flexible, articulated fidget toy incorporates the unique Mimetics 3D Snap-Flex joint, allowing each body segment to wiggle freely OR snap into a fixed position to maximize your fidget experience.

This Baby Basilisk is the first in a line of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

Be sure to check back regularly for more exciting Snap-Flex models in the future.  I'd love to hear your feedback and how we can improve this model together moving forward.

This model is only available for personal use.
If you would like to sell physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Baby Basilisk (Long) - Articulated Snap-Flex Fidget 

This baby basilisk just can't wait to be king of the serpents.  Until then, he's content to lounge about and strike a pose for you and your friends.

This flexible, articulated fidget toy incorporates the Mimetics 3D Snap-Flex joint, allowing each body segment to wiggle freely OR snap into a fixed position to maximize your fidget experience.

This Baby Basilisk is the first in a line of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.  

Stick around for more fun Snap-Flex models in the future.  I'd love to hear your feedback and how we can improve this model together moving forward.

This model is only available for personal use. 
 If you would like to sell physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Shakaworld3d Horned small Baby Sproket Dragon.stl

Baby version of the Horned Sproket Dragon

Shakaworld3d Winged Horned Small Sproket Dragon.stl

This is another fun print and a a variation of the small Horned Sproket dragon with wings.

Crystal Rock Egg Container with Threaded Lid

Rock Top V2.stl

Shakaworld3d Horned Sproket Dragon.stl

Articulated Horned Sproket Dragon may need a brim depending on how good your printer bed adhesion is.

POKEMON - LAMP

LAMP CONTORN.stl

Siege Wyvern

dragon_body.stl

Flamehorn Wyrmling

BabyDragon_C_v01.stl

Shakaworld3d Sproket Viper Snake Ver1

Shakaworld3d Sproket Viper V1 Long.stl

Baby Dragon B Keychain

SpikeySnake - PrintStart3D.stl

Spikey Snake! Watch out this guy is spikey!
The snake is about 1 foot long and is able to articulate!

UPDATE: added a test print try printing the linkbody file to test your printer

Make money by signing up for the PrintStart3D commercial license and sell this 3D printed model!
www.printstart3d.com

articulated dragon - Print in place

Discover the intricately designed 3D model of an adorable baby dragon exclusively on thangs.com. This model perfectly embodies the captivating mystique of fantasy-themed creatures, making it an excellent addition for enthusiasts of 3D printing crafts. The baby dragon, with its fascinated gaze and tiny wings, is sure to add a touch of enchantment to your collection. The model offers immense detail, from its delightful facial expression to the delicate texture of its scales, amplifying its appeal to mythical creature lovers. More than just a hobby, this 3D model will help bring the legendary tales to life. Explore the fantasy collection of Azure3D, the designer of the baby dragon model, for more enchanting creatures. Vote for Azure3D’s next 3D-inspired project right on thangs.com. Time to unleash your printer and delve into the mystical world of 3D fantasy models with this captivating baby dragon.

Check out, my other models!
What should make next?


Dragon

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Dragon Tree Lamp

Remix of Blank Can Cup RETURNS! - Dragon!

Shakaworld3d 4 Faced Monkey Squid

Shakaworld3d 4 faced Monkey Squid V1 Challenge

Baby Basilisk (Short) - Articulated Snap-Flex Fidget

Baby Basilisk (Long) - Articulated Snap-Flex Fidget

Shakaworld3d Horned small Baby Sproket Dragon.stl

Shakaworld3d Winged Horned Small Sproket Dragon.stl

View 12 new models

Shakaworld3d Horned Sproket Dragon.stl

POKEMON - LAMP

Siege Wyvern

Flamehorn Wyrmling

Shakaworld3d Sproket Viper Snake Ver1

Baby Dragon B Keychain

View 11 new models

articulated dragon - Print in place

Gator Dragon Small