Cute Trick or Treat Ghost - Halloween Decor

Ghost-Body_Holoprops.stl

Magnetic Stopper for Cabinet Doors

I had some cabinet doors that wouldn't stay shut, so why not print some quick little magnetic stoppers and save a trip to the hardware store?

These work with [3mm x 6mm magnets](http://bit.ly/DiscMagnets). I printed the model using [Fillamentum 98A Flexfill](http://bit.ly/flexFill) (Pistachio) and also used some metal thumbtacks I had around, although you could simply use two of these stoppers back to back for twice the holding strength!

Glued with [E6000 adhesive](https://amzn.to/3snLNUE). I made a little video about it [on Youtube](https://www.youtube.com/watch?v=JtTyb5e-aKE).



Sliding Closet door bottom stabilizer v2

This model was created for a set of closet doors which slide past each other, hanging from an overhead track. Someone had cut the bottoms of the doors off to accommodate new flooring, so no off the shelf guides worked. I hope that someone finds this useful!

Happy Printing!

Closet door stabilizer v2

Jeep Wrangler Door Handle Inserts

Jeep_Handle_Inserts_v1.stl

Door Stop

Spiky Grip For Guitar Knob

This is a knob cover I designed for my mini guitar. I did this so i could make my guitar glow in the dark. It is a work in progress

Stringing Do Not Disturb Sign

Print at 0.3mm layer height, the strings should be present on the slicer preview.

Do not disturb door hanger template

A template for a simple do not disturb door hanger.

Prints without supports

Add some text or a picture describing what it is you don't want to be disturbed from :)

Cave Entrance

Gracewindale-cave-entrance-tree-doorway.stl

LIVE DOOR PLATE - ON AND OFF

Front.stl

Door stop

**A door stop that you can hang on the door handle when you do not need it without blocking the lock.**
It is flexible and locks under the door when you push it down with your foot.

Size: 20 x 40 (height) x 120 mm
This is the V2
Don’t forget to post your makes!

**Print settings**
Required build volume: 20 x 40 x 120 mm
Material usage: 11g
Print time: 1h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 30% - or more if you want it to be less flexible
Build plate adhesion type: none, if you have bed bad adhesion then a brim 
If you experience any problems, please feel free to contact me on twitter or Instagram

Kitchen Door Clip

I have a pretty small kitchen and after a renovation, we lost the spot where we used to hang our dish towels. After some family brainstorming, we came to the conclusion that we need a whole new house... lol. But in the meantime (which could take a few years), the best solution was to design these clips to attach the towels to the door handles. It works pretty well and it went from a temporary solution to a permanent one.

Just a heads up: these clips were designed to fit the doors and handles I have at home. To make it work in your house, you may need to make some adjustments in X, Y, and Z so the clip fits properly in your kitchen.

Oh, and I'd like to point out:
 - it's a quick print that doesn't use much filament.
 - I've been using them in my kitchen for about a year now and haven't had to replace them yet.

Print Settings:
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 2 or 3
Supports: No
Change filament during print: If you wish
Pause during print: No
Brim: No
Raft: No

I hope you have fun with this model! If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

NICE FLO1 electric gate/garage remote cover with PCB model

Base Telecomando Cancello V1.stl

Hanger Hook for Old Door Hinges

I decided that the door to my closet only got in the way, so I decided to take it off the hinges. I started hanging things on the hinge, but they would often fall off, so I designed a hanger hook that attaches to it instead. I use it to hang my robe.

settings
White PLA
100% infill


Magnetic Front Plate - Bambu Lab P1P #ThangsBambuContest

DISPLAY_ONLY.stl

Door Handle

Just a door handle with countersunk holes for screws

Couch/Ottoman Stopper

Couch Stopper print.STL

Raven RP3 Automatic Weather Seal Cam.stl

Replacement cam for Raven RP3 automatic weather seal. It could work with other brands/models

I just printed in PLA, with 0.15mm layer height and 25% infill.

Door

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 46 new models

View 66 new models

Sliding Closet door bottom stabilizer v2

View 14 new models

View 14 new models

Spiky Grip For Guitar Knob

Stringing Do Not Disturb Sign

Do not disturb door hanger template

View 143 new models

LIVE DOOR PLATE - ON AND OFF

View 31 new models

Kitchen Door Clip

NICE FLO1 electric gate/garage remote cover with PCB model

Hanger Hook for Old Door Hinges

Magnetic Front Plate - Bambu Lab P1P #ThangsBambuContest

Door Handle

Couch/Ottoman Stopper

Raven RP3 Automatic Weather Seal Cam.stl

View 10 new models

View 31 new models