BABY GOKU FOR FREE Z-MINIS

goku.stl

Vector Vases

Vector Vase Large - Standard.stl

Fix Point Slots - STL Remixing Files

Fix Point Slot - Negative.stl

Layer Connections - Community Artwork Tiles

Layer Connections Tile 1.stl

Hex Sticky Note Gridfinity 2x2x5

Like many of you, sticky notes are a way of life.  Get classy with this Gridfinity Hex Sticky Note Bin.  Holds two pads with a little room to grow.

Kinetic Extruder Visualizer Engine

Ready-to-print V-Twin extruder spinner with tight tolerances.

v-twin-all-parts-0.2mm-tolerance.stl

Switch2 Docking Station Stand - Inspired by Donkey Kong - Fan Art

Beige_Left_Hand.stl

Vessel iPhone MagSafe Charging Stand by MODERN MACHINE

VESSELOLDMAGSAFE.stl

Universal Controller Stand - Inspired by Luffy Gear 5 from One Piece

Light_Brown_Luffy_Snail.stl

Chunkonaut - Astronaut Kit | No Supports, No AMS, No Glue

Plate 6 - Cotton White.stl

Happy Lil Reindeer - Christmas Ornament

HappyLilReindeer_Ornament.stl

Spider Gwen - 3MF Full Color - Fan Art

Gridfinity Parametric Baseplate Spacer

If you're anything like me you've been busy dropping Gridfinity baseplates into every single drawer in the house. Before you know it your life is wholly consumed by the grid.

But what do you do when your baseplates don't fit perfectly into your drawers? Randomly jam something into the gap? Glue, screw, or harness the power of magnets to hold them down? Just deal with them sliding around every time you open the drawer? Design a parametric print to fill the gap?

I chose the last option.

In all seriousness, I've been wanting to start learning how to design parametric files in OpenSCAD, and this seemed like an embarrassingly easy place to start.

Just take some measurements, fire up OpenSCAD, and plug those measurements into the customizer panel on the right hand side! You can make spacers to fill out the corner, or just single gaps at the front, rear or sides!

I had to include an STL model for Thangs to be happy, but don't use it unless you need to fill an exactly 10.01mm x 10.01mm corner gap! Use the SCAD file like the nerd we all know you are!

#Gridfinity

4 mm, Mid Sliding Bar

4 mm, Medium Sliding Rail.stl

Spiralized Ornaments - Textured

Hex Top.stl

goomba 

goomba fanart

this model can only be printed in one single color, if you like to get the multipart version please check my patreon at: https://www.patreon.com/pressprint



OctoBenchy_SUNLU

This Octobenchy was designed by SUNLU. It is a variant of the classic Benchy, which is commonly used for 3D printer testing. This model provides a more stringent test for 3D printers. Note that this model is a print-in-place model that needs NO support. If you want 3D print models as perfect as the ones pictured, please 3D print using SUNLU filament: https://www.sunlu.com/

3D PRINTING SETTINGS
PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interior Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO

Benchy with octopus

one piece coaster

This is a simple coaster that I quickly designed for one of my friends,  i just wanted to share it if there’s anyone who watches one piece!

Chain Link Gridfinity Bin 2x2 (20mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: 
Chain Link Gridfinity Bin 2x2 40mm: 
Chain Link Gridfinity Bin 2x2 60mm: 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Christmas Travel Tree

Travel Tree.stl

D

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

BABY GOKU FOR FREE Z-MINIS

Vector Vases

Fix Point Slots - STL Remixing Files

Layer Connections - Community Artwork Tiles

Hex Sticky Note Gridfinity 2x2x5

Kinetic Extruder Visualizer Engine

Switch2 Docking Station Stand - Inspired by Donkey Kong - Fan Art

Vessel iPhone MagSafe Charging Stand by MODERN MACHINE

Universal Controller Stand - Inspired by Luffy Gear 5 from One Piece

Chunkonaut - Astronaut Kit | No Supports, No AMS, No Glue

Happy Lil Reindeer - Christmas Ornament

Spider Gwen - 3MF Full Color - Fan Art

Gridfinity Parametric Baseplate Spacer

4 mm, Mid Sliding Bar

Spiralized Ornaments - Textured

goomba

OctoBenchy_SUNLU

one piece coaster

Chain Link Gridfinity Bin 2x2 (20mm)

Christmas Travel Tree