HOUSE FOR CAT TAO LOW POLY V1  - Follow us: linktr.ee/catalpine

tao-part15.stl

Bowden tube connector (4mm)

A simple bowden tube (4mm)  connector for joining two loose ends.

3D scan of Rancor Head

Scan of Rancor Head using Creality Lizard Scanner.  The OBJ file is a raw file from CR Studio and the STL has been edited only to have a flat base.  The print was done on a BambuLab P1P at .16 layer height in PLA.

Rancor.stl

Little Ogre

Little Ogre.3mf

Chunky Shark.

Chunky Shark.3mf

BIGTREETECH Pi TFT 43 Mount for Ender 3 S1

screen-case.stl

Ice Queen Stylized Bust - Frozen Inspired Fantasy 3D Sculpture 

snow woman.stl

Creality K1 max glass lid and spool holder.

K1 max Glass lid holder 1.stl

Creality E-Fit Cable Housing

I designed this to fit the Creality E-Fit direct drive extruder upgrade.

This fits over the top, keeping the hot end wires and fan wires stationary while the X axis moves. A zip tie slot at the top secures the cables in position.

I printed in resin because of the awkward dimensions but you may be able to make an FDM version.

Bubbly Manatee

Bubbly Manatee Multicolor.3mf

Baby Bat

Baby Bat.3mf

Hamster figurine

Munchie.3mf

HMG7 Lightweight Fan Guard V2.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: [MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

TerraMesh Crossbody Bag | 3D-Printed Wearable Bag | Fashion Accessory | 3A Creates

V3_FrontBoard_CrossBodyBag_TerraMesh v10.stl

CREALITY K1 MAX RAISER / RISER / DECKEL / TOP COVER / UPGRADE (VERSION 1)

PART_BACK-RIGHT_RAISER_K1-MAX (1x).stl

Creality Spool Holder Memory Card 

card holder.stl

Toothy Baby Croc

Toothy Baby Croc.3mf

Chubby Iguana

Chubby Iguana.3mf

FY-11 Digital Humidity /Temp. meter magnet mount

FY-11 is a Digital Humidity and Temperature panel meter. It is compact and cheap. Can be used anywhere. 

It's designed as a panel meter. So mounting is a bit challenging. To solve the problem I designed this magnetic mount which uses 6x3mm neodymium magnets or can be even be screw mounted after clearing the sacrificial layer of 0.2mm.

Material - Any
Layer height - 0.2

Creality CR-10S Electronics Box Legs

These are legs I made for my Creality CR-10s electronics box. I made this because the electronics box fan was mounted on the bottom of the box and air couldn't quite flow correctly.
Make sure to follow us so you get notified when we upload a new model!
Find us on [Instagram here](https://www.instagram.com/dr_3d2023/)
Find us on [Printables here](https://www.printables.com/@DR3D_941794)

Creality

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

HOUSE FOR CAT TAO LOW POLY V1 - Follow us: linktr.ee/catalpine

Bowden tube connector (4mm)

3D scan of Rancor Head

Little Ogre

Chunky Shark.

BIGTREETECH Pi TFT 43 Mount for Ender 3 S1

Ice Queen Stylized Bust - Frozen Inspired Fantasy 3D Sculpture

Creality K1 max glass lid and spool holder.

Creality E-Fit Cable Housing

Bubbly Manatee

Baby Bat

Hamster figurine

HMG7 Lightweight Fan Guard V2.stl

TerraMesh Crossbody Bag | 3D-Printed Wearable Bag | Fashion Accessory | 3A Creates

CREALITY K1 MAX RAISER / RISER / DECKEL / TOP COVER / UPGRADE (VERSION 1)

Creality Spool Holder Memory Card

Toothy Baby Croc

Chubby Iguana

FY-11 Digital Humidity /Temp. meter magnet mount

Creality CR-10S Electronics Box Legs