Notebook Cover Mountains Bookbinding Art

front-a5.stl

Montech Air 100 PCI-E cover lock.3mf

Auxetic Tile // 18mm Diagonal Split

18mmTile_Diag_B.stl

Geeetech Alkaid Vat Cover Remix

Alkaid Vat Cover for PLA.stl

Pixel 7A LEANBEEF Phone Case

Pixel 7A Lean Case.stl

Google Pixel 6A TPU BEEFCASE // MOO

6A_moo_B.stl

Google Pixel 6A TPU BEEFCASE // Blank

6A_blank.stl

Creality Ender 3 pro Main board case with bigger hole for Noctua fan.obj

Main board cover with hole to fit the totally worth bigger and far more silent Noctua NF-A8 FLX fan.

Main board case with hole for Noctua NF-A8 FLX fan.obj

Revopoint Inspire Front Cover

This is a protective front cover for the Revopoint Inspire 3D scanner. If your printer's extrusion flow is calibrated, it should friction fit pretty nicely. 

Cracked Tombstones (Leaning Left)

Cracked Tombstone Left .stl

X-ACTO Knife (Gripster) Cap

A blade cover for the [X-ACTO Gripster Knife](https://amzn.to/405Yv5V) and the [No 11 Classic Fine Point Blade](https://amzn.to/3tk2EYC). This model is a personal favorite for its rubberized barrel that provides comfort and control.

This print has a small footprint, so I recommend printing with a wide brim for better bed adhesion, but that will ultimately depend on your printer.

This cap can also be softened with a heat gun to change the size to fit a regular metal X-Acto knife and some other models.



Photographed model was printed with [MatterHackers Yellow PRO Series PLA](https://bit.ly/PRO-PLA)

PCIe card cover

pcie x16 card cover.3mf

Wyze Cam V1/V2 Outdoor Camera Housing

botmount-bot-nolens-v3.stl

(REMIX ME) Round Lid for Desk Grommet System

Round lid that can be used as a cover for an unnecessary hole in your desk.

Also a good starting piece to remix with your own design.

See other lids for the Desk Grommet System in my profile.

**Fits with:**
Desk Grommet System | Base Screw & Nut: https://than.gs/m/924318


OP-1 BestCase // Simple Decksaver

Protect your OP-1 in the coolest way possible with a 3D printed case! Better yet, the OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

This case uses a friction fit designed for PLA, so materials that shrink more like ABS may be too tight.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these (also on eBay) or these.

 

Aux Headphone Jack Plug 3.5mm

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

---

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

----

Photographed model was printed with [MatterHackers Light Blue PRO Series PLA](https://bit.ly/PRO-PLA)

68 Key Cover // Embedded Print

[Process Video](https://www.youtube.com/watch?v=ABUVz4zIPfo)

A key cover made for the 68 (Schlage, SC1, C) type key. The key is embedded into the print by pausing at 3.4mm and, if necessary, moving the extruder out of the way, to place the key inside the print. Optionally, you can also do a filament change at 4.8 mm to introduce a second color for the top pattern.

---

Pause at Z height 3.4mm to embed key, and at 4.8mm to change colors.

If the layer isn't clean above the key, increase infill/bridging overlap in your slicer, or dry a coat of hairspray on the key.

Cover

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Notebook Cover Mountains Bookbinding Art

Montech Air 100 PCI-E cover lock.3mf

View 22 new models

Geeetech Alkaid Vat Cover Remix

View 10 new models

Google Pixel 6A TPU BEEFCASE // MOO

View 17 new models

Creality Ender 3 pro Main board case with bigger hole for Noctua fan.obj

Revopoint Inspire Front Cover

Cracked Tombstones (Leaning Left)

X-ACTO Knife (Gripster) Cap

PCIe card cover

View 78 new models

View 12 new models

View 20 new models

View 66 new models

View 111 new models

View 72 new models

Proton Jumbuck/Arena Tail Lamp Blank

French Flag