MSI Optix VESA Adaptor (MAG342CQR, MAG342CQRV, MAG301CR2, AG321CQRDE, MAG342CQRVDE)

MSI_vesa_adaptor.stl

Screwless Mod for IKEA HULTARP Knife Rack

HULTARP_screwless.stl

Double Tight Snaps.stl

Adventure Force Crash Racers connector

crashracersconnector.stl

Vacuum Connecter 38mm -98mm 

Vacuum Connecter 38mm -98mm v1.stl

IEC Mains Connection Mount - Kettle Lead

mains_casing_a.stl

XT60 Storage Stackable and non Stackable

XT60 Storage Stackable 6x2Magnets.stl

EZPZ Keyring Heart 1" // Keychain Ring

Keyring Heart.stl

EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring

Keyring Bubbles.stl

EZPZ Keyring Oval 1.5" x 0.75" // Keychain Ring

Keyring Oval.stl

EZPZ Keyring Square 1" // Keychain Ring

Keyring Square.stl

EZPZ Keyring Bone 1" // Keychain Ring

Keyring Bone.stl

EZPZ Keyring 1" BEEFY // Keychain Ring

EZPZ_ring_1in_BEEFY.stl

Washing machine and Dryer 1" waste water double connector

Waschmaschine_trockner_short.STL

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

100mm Elbow Fitting for 4 in. Flexible Duct

I printed this elbow fitting to improve the connection for my dryer's ventilation. I printed it in [Fillamentum ASA](https://bit.ly/FL-ASA)([Also on MatterHackers](https://bit.ly/MH-asa)) and it has held up great for about a year so far!

Print solid with many shells. It can technically print without supports but I used a tiny bit at at the center of the elbow for a cleaner print.

4.6.stl

This is a replacement connector for the vacuum line that goes out the back of the intake manifold on Ford Triton's.  It was made for a 98 F-150.  The rubber ones eventually crack and you get a vacuum leak.
It should be printed with TPU and several exterior walls so that it doesn't leak.
Might have to heat it up to get the plastic line inserted.
Might get you by until you can get the rubber one.

Origami Thorn - Self Connecting Piece

A self interlocking mechanism piece inspired from Origami.

It can used to create variety of shapes. Checkout for term "Origami 3d pieces art" for more inspirations.

The printed model was printed at 50% ratio with white PLA, 0.2 mm layer height

Origami Triangle - Self Connecting Piece

A self interlocking mechanism piece inspired from Origami. 

It can used to create variety of shapes. Checkout for term "Origami 3d pieces art" for more inspirations.

The printed model was printed at 50% ratio with white PLA, 0.2 mm layer height
 

Connector

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 13 new models

Screwless Mod for IKEA HULTARP Knife Rack

Double Tight Snaps.stl

Adventure Force Crash Racers connector

Adventure Force Crash Racers connector

Vacuum Connecter 38mm -98mm

IEC Mains Connection Mount - Kettle Lead

XT60 Storage Stackable and non Stackable

EZPZ Keyring Heart 1" // Keychain Ring

EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring

EZPZ Keyring Oval 1.5" x 0.75" // Keychain Ring

EZPZ Keyring Square 1" // Keychain Ring

EZPZ Keyring Bone 1" // Keychain Ring

EZPZ Keyring 1" BEEFY // Keychain Ring

Washing machine and Dryer 1" waste water double connector

EZPZ Pegboard Hook // 20mm Hook Type B

View 17 new models

4.6.stl

Origami Thorn - Self Connecting Piece

Origami Triangle - Self Connecting Piece