Vertical laptop stand (3 laptops)

So I have a few thick laptops to organize. 

I did a single laptop stand design a few days ago and expanded on that. 

Some overhang on the middle 2 ribs, will probably need supports to prevent sagging.  

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DeAZr9P
*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

cute calibration cube 

Cute calibration cube
its 20mm by 20mm by 20mm 

Seagate Expansion 4TB External Drive Holder // Peg Anything

Get your [Seagate Expansion external drive](https://amzn.to/3L9GIWh) off the desk and on the wall with this holder compatible with your standard 1" grid 1/4" hole pegboard. Nice!

This is for the 4TB model, so make sure it matches what's shown in my photo. I'm not sure if the lower storage sizes are thinner.

 

 

peg-seagate4tb.stl

Minimalist GoPro Handlebar Mount

M5x25mm GoPro Handlebar Mount.3mf.3mf

Yellow Front Loader with Movements

Vertical laptop stand 

I'm inspired by many laptop stand designs but didn't see one that I like and is usable for my old thick laptop without changing the size ratio. 

I'm thinking of how to change the design to hold multiple laptops. 

*****

Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s 

Clicking on my affiliate links below will give me a small kickback 
if you purchase something within 3 days. (at no extra cost to you)

AliExpress affiliate links:

KF2510 connector kits
https://s.click.aliexpress.com/e/_DmDtRxV
JST XH2.54 connector kits
https://s.click.aliexpress.com/e/_DFUeIRZ
40mm fans
https://s.click.aliexpress.com/e/_DC5YlPl

*****

Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C 

Headset Stand v1

Wall mount Oculus shelf with battery storage - Print in place

Free for the first week then members only! Part of our newest drop of models to help you grow your business or hobby!

For commercial license to permit sales of physical prints subscribe to thangs memberships!

Fixum Dude Motors PiP Concrete Truck

Print in place concrete truck with rotating wheels and mixing drum. 

Introducing the FDM (Fixum Dude Motors) print in place concrete truck. The wheels and the concrete mixing drum rotate right off the build plate.

Prints on its side without supports. Sample printed in Hatchbox Blue PLA on the Prusa MINI+ in .25LH Draft mode, with 4 top/bottom layers, 3 perimeters and 10% gyroid infill. 

Yellow Pickup Crane Version 2

Box with a lack

stronger hing for smaller box.stl

Strong paracord hook

One can learn to tie the Prusik (not related to Prusa) knot or use my ingenious clamps for securing objects. I have created two versions of the clamps:

Outside Hook - This version is simple to print and is my personal favorite.
Inside Hook - This version is slightly more stylish and features a protected inner hook. This design reduces the risk of injuries, especially for children. However, it is not as strong as the outside hook version and may be a bit more challenging to print.
Both versions are designed to accommodate three common paracord diameters:

Cord 550: 4mm (according to specifications)
Cord 550: 3.8mm (dimensions of some brands)
Cord 750: 5mm (also commonly used for various other ropes)
You can scale the clamps proportionally to ensure a proper fit for your specific cord.

These clamps are much stronger than typical clothespins. Their strength doesn't rely on springs but rather on the design of the side lips. When under stress, the cord is prevented from slipping through the lips due to their orientation to the pulling force:


When I tested them, they were able to hold over 20 kg when printed in PET-G. The actual strength may vary depending on the material used and the specific dimensions of the paracord.

Printing Instructions:

Materials: ASA, PET-G (Note: PLA can degrade over time and the clamp is intended for outdoor use)
Print orientation: On its side, as shown in the attached picture. For increased strength, the print lines should follow the spring mechanism.
Wall count: Use at least 4 walls for added durability.
Brim: Optional but can be useful to improve adhesion.
Supports: No supports are needed.
 

Enjoy

550 4mm Outside.stl

Yet another flux Dispenser

Candy Propeller Plane

Gridfinity Xbox One Controller Holder with cable storage.3mf

Holder for the Xbox One Controller with a cable storage option

Customizable Filament Sample

This is a Customizable Filament Sample, which can be modified in Autodesk Fusion 360. Fits well Filament Sample Box created by Extrutim.

---

**Modification instructions**

1. Open .f3d file in Fusion 360.
1. Edit Sketch - Text.
1. Edit created text.
1. Enter desired information such as: brand, material and color.
1. Finish sketch.
1. Export created body as a mesh.

---

**Recommended print settings**

- layer height: 0.1 mm
- solid layers: 10
- fill angle: 0°
- seam position: **aligned**

Cloud Stand Playstation 5 Disc Edition - Print-in-Place

Clouds_PS5_Disc-_Front-Holoprops.stl

iPhone 13 Case

Case for the iPhone 13. It has grips on the side to help prevent drops.

Fits the regular iPhone 13 only.

Designed for PLA/non-flexibles.

Computers & electronics

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Vertical laptop stand (3 laptops)

cute calibration cube

View 21 new models

Minimalist GoPro Handlebar Mount

Yellow Front Loader with Movements

Vertical laptop stand

Headset Stand v1

View 10 new models

Fixum Dude Motors PiP Concrete Truck

Yellow Pickup Crane Version 2

Box with a lack

Strong paracord hook

Yet another flux Dispenser

Candy Propeller Plane

Gridfinity Xbox One Controller Holder with cable storage.3mf

Customizable Filament Sample

View 46 new models

iPhone 13 Case

3/16" Shelf Support Peg

Legrand DLP plate 100 mm