As seen on TikTok

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared.
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings -
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No

Blank Sign - Do your own design on it!

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared.
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings -
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No



$45.00 Display sign

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


Alpakka Dimpled Thumbstick Variant

Recessed Dimple Short Stick Thick Base

Ultra Thin Credit Card Sheath/Cover

raspberry pi 4 model b mount for ender 3 v3 se

Computer case perpendicular fan mount

Still have plenty of room for improvement, print with caution! I may or may not come back to improve on these flaws, but you are welcome to print and try it out.

Most computer cases have a mounting for a fan at the bottom of the case. However, for my case, that was unusable after I changed to a longer power supply. So I thought why not make a bracket to let the fan mount vertically to direct more airflow to the graphics card. 

I could have created or bought a 90 degrees bracket with holes and solve the problem, but wanted something that didn't need me to flip my desktop over to screw in the fan from the bottom.

Results from adding an extra fan to redirect airflow have been inconclusive so far. The catches to hook onto the fan mounting holes for a 120mm fan are a bit flimsy and the fan will lean back slightly. (which might be a good thing?) 

Every new design is a learning process and I welcome feedback.

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DeAZr9P

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

Print in Place Folding Phone/Tablet Stand

A simple print in place folding phone and tablet stand. The model can be scaled up or down to suit your needs

FHW: Set size blank

this is the blank slackers..
Cheers
Maker

ZBook Docking Station

zbook_assembly.stl

Wacom Intuos Mouse // Peg Anything

A customized pegboard fixture made just for the mouse of my Wacom Intuos tablet. Snaps into place on any standard pegboard with 1/4" holes spaced 1" apart



Logitech Shifter Stabilizer

This is a stabilizer designed to fit onto the screw clamp of the Logitech Driving Force Shifter compatible with the G29 & G920 series wheels. (It may fit other models like G27, I'm not sure

Logitech_Shifter_Stabilizer.3mf

Snapchat Decoration

Introducing this fun and visually appealing 3D model - the Snapchat Decoration by Frikarte3D! This unique model replicates the famous Snapchat ghost logo, making it an excellent addition to your trendy office or digital workstation decor. The logo, which is appreciated by millions around the world, has been skillfully designed into a tasteful 3D model. Endowed with a simple design, it can be 3D printed in your preferred color to match your surroundings. The Snapchat Decoration has been intricately designed with detailed finishing to closely represent the original logo, making it a must-have for Snapchat and social media enthusiasts. Suitable for both experienced and novice 3D printing enthusiasts, this model doesn't require any complex assembly. Whether you're a Snapchat fan or are simply after a chic, modern ornament for your workspace, this is an ideal model for you to print!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

The Horadric Server #FunctionalArt

sigil.stl

miyooV2stand.3mf

I made this for my miyoo mini v2. I don´t know if it will work on other models :)

Portable Monitor Holder

75 degrees

Simple MicroSD Card Holder

mophie wireless charger/phone stand

I felt it was inconvenient to pick up my phone and take it off the charger to check my notifications. This allows you to have your phone charging and still be able to look at it.

I printed it at 10% infill and pla and its extremely sturdy, you likely could get away with a lower infill

This is also the second thing I have ever modeled

Minecraft Magnetic Anomaly

https://www.planetminecraft.com/project/tycho-magnetic-anomaly/ BY https://www.planetminecraft.com/member/ryer/

Computer

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

As seen on TikTok

Blank Sign - Do your own design on it!

View 36 new models

CPU

Alpakka Dimpled Thumbstick Variant

View 22 new models

raspberry pi 4 model b mount for ender 3 v3 se

Computer case perpendicular fan mount

Print in Place Folding Phone/Tablet Stand

FHW: Set size blank

ZBook Docking Station

View 66 new models

Logitech Shifter Stabilizer

Snapchat Decoration

The Horadric Server #FunctionalArt

miyooV2stand.3mf

Portable Monitor Holder

View 14 new models

mophie wireless charger/phone stand

View 17 new models