Pikachu in a Christmas Sock_Pose 1 (Fanart)

Pikachu in a Christmas Sock_Pose 1_Normal Sock.stl

Spiral Christmas Finial 2024

Finial Spiral Whole.stl

Shelf Grinch  

Shelf Grinch body without front fluff.stl

Spiral and Fine Lattice Balls with Stems

Spiral Ball 2022.stl

TPMS Tree (Gyroid)

TPMS Tree (Gyroid).stl

Festive Santa Penguin Figurine for Christmas Decor

Penguin with gift_.3mf

Truss Tree (Kelvin)

Truss Tree Kelvin.stl

R2D2 Christmas Tree Decoration

R2D2 Christmas Ornament Frikarte3D.stl

Stormtrooper Christmas Tree Decoration

This is an Stormtrooper Helmet Christmas Tree Decoration.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 13 (0 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

Knitted Snowman Candle Holder / Ornament / Figurine / Multiparts / 3MF

Snowman Knitted Figurine 2x FF Bambu Studio.3mf

Christmas Ball - Alternating Diamonds

Alternating Diamond Stacks 4b Simplified Repaired.stl

Gingerbread Cookie Dragon Egg

Gingerbread cookie egg base.stl

Closed Spiral Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I printed at 200 C with 115% flow.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm. 

*Infill*
This does not need any infill. JUST DON'T DO IT – especialy if you print it with transparent filament.

*Speed*
* Outer Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
I first printed with used normal supports and an overhang angle of 67 degrees and no other supports. It worked until 2 minutes from completion, when the model came loose from the bed. When I tried again, I with an overhang angle of 64 degrees and added 8 custom supports that keep the model from wobbling. I've included a screenshot from Cura of the supports. 

I added a support blocker in the loop to keep from having supports added inside the loop.

Shelf Santa 

Shelf Santa.stl

Sh-elf Elf, Male

Sh-elf body male.stl

Ice Bowl (Small)

Add some artic chic to your serving table this year with these cool ice bowls.

See here for video: https://youtu.be/wdaEN05fzJQ 

Small Ice Bowl:
Large Ice Bowl:

These are advanced prints that require a well calibrated printer and experience with slicing complex models. 

The bowls are printed upside down. I recommend raising the model 3mm off the build plate and building supports up into the cavity of the bowl.

In order to maximize optical clarity and visual effect, you will want to minimize the amount of infill. These are excellent prints to try out the “lightening infill” feature in Cura. “Lightening infill” minimizes the amount of infill material used, and also creates interesting “crack” silhouettes in the finished print.

Increase the infill density and reduce the angle of overhang that gets supported, aiming for adequate support at the base of the icicle, but minimal support up inside the icicles. Be sure to do a layer-by-layer inspection prior to printing to ensure that all areas are properly supported.


Christmas decoration

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pikachu in a Christmas Sock_Pose 1 (Fanart)

Spiral Christmas Finial 2024

Shelf Grinch

Spiral and Fine Lattice Balls with Stems

TPMS Tree (Gyroid)

Festive Santa Penguin Figurine for Christmas Decor

Truss Tree (Kelvin)

R2D2 Christmas Tree Decoration

Stormtrooper Christmas Tree Decoration

Knitted Snowman Candle Holder / Ornament / Figurine / Multiparts / 3MF

Christmas Ball - Alternating Diamonds

Gingerbread Cookie Dragon Egg

Closed Spiral Christmas Ornament

Shelf Santa

Sh-elf Elf, Male

Ice Bowl (Small)

XL Snowman, For larger Build plates

Christmas Gnome Trio – Holiday Figurine Set

Frosty Snapman - Flat Base.stl

Merry Christmas Tabletop Decoration