Calibration Cube

This is a calibration cube based on my logo. The dimensions of the cube are 20 mm x 20 mm x 20 mm. The indentations are 1 mm deep. On the opposite side of each wall are small letters indicating X, Y, Z axes.

Gridfinity Ikea Alex Drawer - Light Locking Base - 10x7 Grid

GridfinityBaseplate - IkeaAlexTall - 10x7 - Bottom Left.stl

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Mood Mate - Spacesuit - Faces 2.stl

Lattice Benchy (Face-centered Cubic Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice:
Wicker:


SwatchGRID - 20mm Calibration Cube Holder

20mm cubes make a nice color/material swatch,  Not a lot of room to write what they are, but just enough for me. This grid holds them securely, with holes in case some of your cubes don't want to leave home.

Printer Clearance Test Puzzle

a.stl

The House Of Benchmark

house_of_benchmark_one_piece.stl

Calibration Fool

Looking for an April Fool’s Day post? Print and post to social media… be sure to tag (and blame!) all your favourite 3D printer and filament brands. Use hashtag #calibrationfool 
See here for video: https://youtube.com/shorts/ii4bMlS8C14 


Calibration Hammer a.k.a. Hammer 2.0

Calibration Hammer.3mf

cute calibration cube 

Cute calibration cube
its 20mm by 20mm by 20mm 

Simple Adjustable Stringing Test

stringing-test-base.stl

Retraction Test For 3D Printing

Retraction Test.stl

Frikarte3D XYZ Calibration Cube Plus

Frikarte3D XYZ Calibration Cube Plus.stl

Nero_Cube 45.stl


30x30x30mm Test Calibration cube. 45degree edition
Credit to That602Guy for the original design

Tippi Tree Test Piece

Here's the test piece for [Tippi Tree](https://than.gs/m/933018). You can use it to make sure your printer settings are well-tuned for printing your Tippi Tree without using too much time or material.


Recommended: PLA 0.4mm nozzle, 0.16mm layer height, 11% infill, 2 shells, 5 top/bottom layers

CNC Mill Zero Point Block

This little tool helps align the end mill of your CNC to the very corner of your rectangular stock. It has lines that help you manually find the center more accurately than without. The hole is for a 1/4" end mill, but it can still help for most sizes (and it should scale quite easily if you choose to print at a different size)

CR10 S5-First Layer Calibration

A simple first layer calibration test for the CR-10 S5 (or similar 500x500 mm bed size).

I made this after finding that the generated skirt (on similar layer tests) on my slicer was not what I needed. This removes that variable.

Actual Dimensions are 440.2 x 440.2 x .2 mm (LxWxH)

The pattern is .2mm thick. Skirt not necessary, or intended, for printing.

Calibration

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Calibration Cube

Gridfinity Ikea Alex Drawer - Light Locking Base - 10x7 Grid

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Lattice Benchy (Face-centered Cubic Lattice)

SwatchGRID - 20mm Calibration Cube Holder

Printer Clearance Test Puzzle

The House Of Benchmark

Calibration Fool

Calibration Hammer a.k.a. Hammer 2.0

cute calibration cube

Simple Adjustable Stringing Test

Retraction Test For 3D Printing

Frikarte3D XYZ Calibration Cube Plus

Nero_Cube 45.stl

Tippi Tree Test Piece

CNC Mill Zero Point Block

CR10 S5-First Layer Calibration

Angle Gauge 35 to 175 degrees

Flow Calibration Tiles

Calibration Cube