Gridfinity Ikea Alex Drawer - Light Locking Base - 10x7 Grid

GridfinityBaseplate - IkeaAlexTall - 10x7 - Bottom Left.stl

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Mood Mate - Spacesuit - Faces 2.stl

Lattice Benchy (Face-centered Cubic Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice:
Wicker:


XYZ Calibration Test - Vase Mode

Quick 10 minute print - 0.3 m of filament

Don't waste your precious time and filament printing a so called “calibration cube”!

This quick print provides clues for all the important features and settings:

Extrusion width
E-steps / rotation distance (X, Y, Z)
Bridging
Cooling
Overhangs
Speed / accelleration
First layer / bed adhesion
Retraction (stringing test, seam test)
Preassure advance / linear advance
Print Settings
1 perimeter
0.2 mm layer hight
3 bottom layers
Disable “Ensure vertical shell thickness” (PrusaSlicer)
No Infill, top layers, brim or supports

**Troubleshooting**
https://www.reddit.com/r/3Dprinting/wiki/troubleshootingandcalibration

Some quick tipps:

_**Extrusion width**_
Check if the thickness of one of the outside walls at the top matches the setting in your silcer
**_E-steps / rotation distance (X, Y, Z)_**
If the outside dimensions are not 20 mm but way off, correct the settings for the affected axis
**_Bridging / cooling_**
If the bridging perimeters in the top center are drooping/sagging, check cooling an bridging settings in your slicer
45° overhangs
If the perimeters in this section are drooping/sagging, check the part cooling and cooling settings in your slicer
**_Speed / accelleration_**
ringing, bulged corners - you may want to reduce speed and/or accelleration (also see Preassure advance / linear advance)
**_First layer / bed adhesion_**
If there are problems with the print adhering to the bed, check if
- the bed is level and parallel to the x-axis
- the bed is clean - no dirt or grease
- the bed temperature is correct
If the print is wider at the bottom (first few layers) than at the top, check your z-offset and first layer settings
**_Retraction (stringing test)_**
If you experience stringing, check your retraction and cooling settings
**_Preassure advance / linear advance_**
If large seam gaps or bulged corners appear, consider tuning your printer firmware settings for preassure advance (Marlin) / linear advance (Klipper)

XYZ Calibration Test

SwatchGRID - 20mm Calibration Cube Holder

20mm cubes make a nice color/material swatch,  Not a lot of room to write what they are, but just enough for me. This grid holds them securely, with holes in case some of your cubes don't want to leave home.

The House Of Benchmark

house_of_benchmark_one_piece.stl

Calibration Fool

Looking for an April Fool’s Day post? Print and post to social media… be sure to tag (and blame!) all your favourite 3D printer and filament brands. Use hashtag #calibrationfool 
See here for video: https://youtube.com/shorts/ii4bMlS8C14 


Calibration Hammer a.k.a. Hammer 2.0

Calibration Hammer.3mf

cute calibration cube 

Cute calibration cube
its 20mm by 20mm by 20mm 

Simple Adjustable Stringing Test

stringing-test-base.stl

Retraction Test For 3D Printing

Retraction Test.stl

Frikarte3D XYZ Calibration Cube Plus

Frikarte3D XYZ Calibration Cube Plus.stl

Nero_Cube 45.stl


30x30x30mm Test Calibration cube. 45degree edition
Credit to That602Guy for the original design

Tippi Tree Test Piece

Here's the test piece for [Tippi Tree](https://than.gs/m/933018). You can use it to make sure your printer settings are well-tuned for printing your Tippi Tree without using too much time or material.


Recommended: PLA 0.4mm nozzle, 0.16mm layer height, 11% infill, 2 shells, 5 top/bottom layers

Printer Clearance Test Puzzle

a.stl

CNC Mill Zero Point Block

This little tool helps align the end mill of your CNC to the very corner of your rectangular stock. It has lines that help you manually find the center more accurately than without. The hole is for a 1/4" end mill, but it can still help for most sizes (and it should scale quite easily if you choose to print at a different size)

CR10 S5-First Layer Calibration

A simple first layer calibration test for the CR-10 S5 (or similar 500x500 mm bed size).

I made this after finding that the generated skirt (on similar layer tests) on my slicer was not what I needed. This removes that variable.

Actual Dimensions are 440.2 x 440.2 x .2 mm (LxWxH)

The pattern is .2mm thick. Skirt not necessary, or intended, for printing.

Calibration

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity Ikea Alex Drawer - Light Locking Base - 10x7 Grid

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Lattice Benchy (Face-centered Cubic Lattice)

XYZ Calibration Test - Vase Mode

SwatchGRID - 20mm Calibration Cube Holder

The House Of Benchmark

Calibration Fool

Calibration Hammer a.k.a. Hammer 2.0

cute calibration cube

Simple Adjustable Stringing Test

Retraction Test For 3D Printing

Frikarte3D XYZ Calibration Cube Plus

Nero_Cube 45.stl

Tippi Tree Test Piece

Printer Clearance Test Puzzle

CNC Mill Zero Point Block

CR10 S5-First Layer Calibration

Angle Gauge 35 to 175 degrees

Flow Calibration Tiles

Calibration Cube