Hero Me Documentation - Details.stl

Documentation Membership Details.stl

Creality K1 Bowden tube clip (Top mounting)

K1-BowdenClip-ChainTop.stl

Pivoting Filament Guide for Frame Mount

part_c.stl

Creality K1 Bowden tube clip (Side mounting)

K1-BowdenClip - ChainSide.stl

Qidi Q1 Pro Lid Riser - But this one fits.

qidi_top_riser_kwerkshop_qidi_top_riser v4_B.stl

Bowden Tube Holder for K1

This is a press fit bowden tube holder for the Creality K1. If you connect a dry box or just want to guide the filament using a bowden tube, this will hold the tube in place.

Tolerances are important for it to press fit into the honeycomb.

Note - Print it vertical for maximum strength. No supports needed for printing but if you feel just add a brim for adhesion.

Ender 3 Linear rail bowden mount

Cable and bowden clip v11.stl

Top Bowden Tube Guide

TopBowdenGuide.stl

Bowden Tube Guide

Bowden Tube Guide. Used to keep the tube in a stable position. 

Bowden Tube Guide © 2024 by Plant Industries is licensed under CC BY-NC-ND 4.0 

K1 Max - Riser - SideSpool - Bowden extend clips

K1 Max Lid Riser for side spool.stl

Bowden tube connector (4mm)

A simple bowden tube (4mm)  connector for joining two loose ends.

Bowden connector 2020 V slot mount

bowden connector 2020 V slot mount v2.3mf

Bowden tube caps for Dry boxes

BowdenCap.stl

Safety clip (Clip de racor)

It is a safety clip for the pneumatic fitting or for a 4mm outer diameter quick connector for 3D printer.

The G-code is created with PrusaSlicer for Prusa mini with an ultra definition of 0.05 mm; but it can also be printed for Creatity and other printers that use Marlin, (if you have a glass bed with clamps, make sure before putting it on, to remove the front clamp on the left, to prevent the nozzle from colliding with it, when doing the first line of filament checking), since PrusaSlicer does it on the front of the hot bed, not like Cura, which does it on the left.

 

Il s'agit d'un clip de sécurité pour le raccord pneumatique ou pour un connecteur rapide de 4 mm de diamètre extérieur pour imprimante 3D. 

Le code G est créé avec PrusaSlicer pour Prusa mini avec une ultra définition de 0,05 mm ; mais il peut également imprimer pour Creatity et d'autres imprimantes qui utilisent Marlin, (si vous avez un lit en verre avec des pinces, assurez-vous avant de le mettre en place, que vous retirez la pince avant gauche, pour éviter que la buse n'entre en collision avec (lors de la vérification de la première rangée de filaments), puisque PrusaSlicer le fait sur le devant du lit chaud, pas comme Cura, qui le fait sur la gauche.

 

Se trata de un clip de seguridad para el racor neumático o para un conector rápido de 4 mm de diámetro exterior para impresora 3D. 

El código G está creado con PrusaSlicer para Prusa mini con una ultra definición de 0,05 mm; pero también se puede imprimir para Creatity y otras impresoras que usan Marlin, (si tienes una cama de cristal con abrazaderas, asegúrate antes de ponerla, de quitar la abrazadera frontal de la izquierda, para evitar que la boquilla choque con ella, al hacer la primera línea de comprobación de filamento), ya que PrusaSlicer lo hace en la parte frontal de la cama caliente, no como Cura, que lo hace en la izquierda.

Creality CR-6 SE Rubber Band Bowden Guide

Cr-6 SE Tubing Guide Part 1.3mf

Voron 0.2r1 Bowden Umbilical Guide

voron_02_guide_v2.stl

PC4 filament funnel

filament PC4 funnel.stl

Low Friction Spool Holder Adapter

Low Friction Spool Holder Adapter

Are you like me and upgraded your bowden tube, but held on to the old one?

Well you are in luck!  Use it as part of this adapter to reduce friction between your spool and the spool holder.

Designed primarily for the Ender 3, but any similar spool holder should work.

Yes this is a mashup, however it does have significant changes and qualifies as unique work.  See license.txt for more details.

1. Cut two bowden tubes to fit in side of each track.
2. Remove the tube from your spool holder and snap on the adapter.
3. Put the tube back on the spool holder.
4. Enjoy

- Easy snap fit!
- Bowden tubes are low friction by design.
- The curved shape further reduces friction by limiting contact with the spool to two points.
- The curved shape uses gravity to keep the spool centered on the spool holder.

Supports are required. I would suggest using support blocker on the bowden tube holes, they seem to print fine.  

* I used tree supports and a brim.
* I printed at 5° hotter than normal to help with layer adhesion.
* I printed at 0.12 for a smoother look. However during testing I printed at 0.2 and it worked without issue.


UMO+ feeder bowden clamp cap extra strength

Bowden clamp cap extra strength

Bowden

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hero Me Documentation - Details.stl

Creality K1 Bowden tube clip (Top mounting)

Pivoting Filament Guide for Frame Mount

Creality K1 Bowden tube clip (Side mounting)

Qidi Q1 Pro Lid Riser - But this one fits.

Bowden Tube Holder for K1

Ender 3 Linear rail bowden mount

Cable and bowden clip v11.stl

Top Bowden Tube Guide

Bowden Tube Guide

K1 Max - Riser - SideSpool - Bowden extend clips

Bowden tube connector (4mm)

Bowden connector 2020 V slot mount

Bowden tube caps for Dry boxes

Safety clip (Clip de racor)

Creality CR-6 SE Rubber Band Bowden Guide

Voron 0.2r1 Bowden Umbilical Guide

PC4 filament funnel

Low Friction Spool Holder Adapter

UMO+ feeder bowden clamp cap extra strength