long pull shifter friction shifter

Bar mounted shifter based on https://www.thingiverse.com/thing:112602 but modified for use with wide range/mtb derailleurs.  It has about 1.4 times the pull ratio of a normal shifter.  The lever has been made longer to compensate.  It is also reversed like a shifter for a front derailleur but this is because it is intended to be mounted on the bottom of a right bar.

Non-printed parts:
2x #10 Nylon Lock Nuts
2x #10 x 1" Machine Screws
1x #10 Washers
1x 1-1/4" fender washer
2x 1-1/4' rubber washers
Splicing tape (or thin piece of rubber) for mounting (standard electrical tape does not work) 

F1 Tire Plant Pot

Tire valve cap- Heart 

Chinese Diesel Heater Muffler Collection

Chinese Diesel heater blower muffler

10th scale rc paddle tire

I designed this tire for snow, sand, and water. It is made for a 12 mm wheel hex and has an outer diameter of 10.5 centimeters to the tips of the paddles.

Pickup Truck

Print in place, the wheels do turn.
low tolerance on the front wheels.

Mini boat fender floating keyring

Fender shaped keyring, ideal for boat keys.

Citroen v4.step

glider launch arm.stl

for any rubber band launch aircraft. put into grove for rubber band and fling.

Presta Valve Tool

presta_valve_tool.step

Tire Valve Cap and TPMS O-Ring

Volvo logo

Moto morini 250 2c Airbox to carb rubber

Carburettor to airbox rubbers print in TPU. Join between carb and airbox rubber can be cut to size.

Moto morini Rubbers to link carbs to airbox

Garelli_rear engine mounts x4

Print in TPU (shore 95a a little too hard). Small mounts x 2 for front engine mount. Large x4 for rear

rear engine mounts x4 v2022.stl

Ford Truck

Ford Truck Ornament

Chevy Truck

Chevy Truck Ornament easy to print less than a hour with no supports

Chevy Truck Ornament

Chevy 1957 solid design

Chevy 1957 Solid

ibis ripmo AF frame mountainbike tool holder

This is designed to fit in the little hole of the shock mount on my Ibis Ripmo AF (XL) mountain bike and it holds a 4, 5, and 6mm allen key. Can be secured with a cable tie, or some double sided tape.
 I don't know if it will fit any of the other frame sizes.

Racing Tail v18.step

I'm working on a fully integrated racing tail for my 1979 Yamaha XS750.  (sort of cafe racer meets motoGP). 

Currently a WIP.  Basic shape done.  Next making changes for lights.

Autos & Vehicles

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

long pull shifter friction shifter

F1 Tire Plant Pot

View 22 new models

Chinese Diesel Heater Muffler Collection

10th scale rc paddle tire

Pickup Truck

Mini boat fender floating keyring

Citroen v4.step

glider launch arm.stl

Presta Valve Tool

View 23 new models

Volvo logo

Moto morini 250 2c Airbox to carb rubber

Garelli_rear engine mounts x4

Ford Truck

Chevy Truck

Chevy 1957 solid design

ibis ripmo AF frame mountainbike tool holder

View 14 new models

Bike Handle