GT Omega Cockpit Sim Racing Rig Adapter For Beavis Racing Shifter and Handbrake

This is an adapter plate used to attach the 3D Printed Beavis Racing sequential shifter and a handbrake to the small mount included on GT Omega brand sim rig frames. This plate will likely work for a variety of other cheap sim racing rigs including brands like Minneer, Vevor, Marada and Anman

Narrow Schrader Valve Adapter

This adapter is a Schrader-to-Schrader connection designed to be able to connect to a valve in a tight corner. It is a friction fit by design, but for a better and easier seal, an 8mm OD O-ring can be pushed into the female end. The diameter of the female end is 12mm. I suggest printing it in PETG, or PC for strength.

Print Settings:
infill 100%
0.16mm layers
0.5mm line width
brim for adhesion
no supports needed
print at the highest practical temperature for the material used

Adapter rings for bases (25 mm to 28, 32 or 40 mm)

25mm_to_28mm_adapter.3mf

Modular Air Tool Organizer

HolderBaseLabel.stl

Adapter rings for bases (40 mm to 50 mm)

40mm_to_50mm_adapter.3mf

Filter adapter (49 mm, 52 mm)

adapter_52mm.stl

RapidBurner v0.2 v8 Eibos Artemis Mount

RapidBurner v0.2 v8 Eibos Artemis Mount.3mf

Foodsaver Vacuum Hose to Zwilling Adapters

Bags_Foodsaver_Zwilling_Adapter.stl

Hose Reductor (For Crank Case Vent)

reductor.stl

Shimano Hollowtech Bottom Bracket Cup Wrench adapter.  TL-FC32 --> TL-FC25

suportokretacz.stl

SSD T7 MAGSAFE HOLDER FOR IPHONE / IPHONE / MAGSAFE / PHONE ACCESSORIES

SSD_T7_HOLDER.stl

DB9 Banana Plug Adapter

This is a simple DB9 to a single banana plug connector. I needed this for work to get one of the pins to a DMM. You will need 2 M3x12 Flat Head Cap Screws.

Four LEDs mount

4_leds_mount_5mm.stl

CommScope/Lucent M1000 Multimax Keystone Adapter

Alcatel-M1000-Keystone-Adapter.stl

DIY Wireless RC Head Tracker Enclosure – Arduino Nano BLE 33 Case

WHTTopCase.step

Keychron k series aliminium rail adapter

A rail that clips on to the Keychron K# series of keyboards' aluminium rails.
Supports are recommended, remove them carefully to make sure you don't damage the stabilising part of the clip.

Adapter

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GT Omega Cockpit Sim Racing Rig Adapter For Beavis Racing Shifter and Handbrake

Narrow Schrader Valve Adapter

Adapter rings for bases (25 mm to 28, 32 or 40 mm)

Modular Air Tool Organizer

Adapter rings for bases (40 mm to 50 mm)

Filter adapter (49 mm, 52 mm)

RapidBurner v0.2 v8 Eibos Artemis Mount

Foodsaver Vacuum Hose to Zwilling Adapters

Hose Reductor (For Crank Case Vent)

Shimano Hollowtech Bottom Bracket Cup Wrench adapter. TL-FC32 --> TL-FC25

SSD T7 MAGSAFE HOLDER FOR IPHONE / IPHONE / MAGSAFE / PHONE ACCESSORIES

DB9 Banana Plug Adapter

Four LEDs mount

CommScope/Lucent M1000 Multimax Keystone Adapter

DIY Wireless RC Head Tracker Enclosure – Arduino Nano BLE 33 Case

Keychron k series aliminium rail adapter

Lumix G Vario 14-42 67mm adapter ring

Refill Riser for WILD Deodorant Dispenser

car filter to 120mm computer fan adatper

StarLink Dishy Tripod Adapter for 1" post and 3/8-16 Bolt