DB9 Banana Plug Adapter

This is a simple DB9 to a single banana plug connector. I needed this for work to get one of the pins to a DMM. You will need 2 M3x12 Flat Head Cap Screws.

Hose Reductor (For Crank Case Vent)

reductor.stl

Lossless Adapter Desk Mount

Lossless Desk Mount.stl

Refill Riser for WILD Deodorant Dispenser

wild_refill_extender_kwerkshop.stl

Lumix G Vario 14-42 67mm adapter ring

LensAdapter.stl

MattMill Student Grain mill fastener and funnel adapter

Part Studio 1 - funnel_holder.3mf

Milwaukee M18 Vacuum to tool dust collector adapter 

Milwaukee Adapter v1.stl

Klein Precision to 1/4" Bit Adapter

Adapter-Body.stl

E3D V6 Hotend easy maintenance carriage for Felix 3D printer

Solar Light Pipe Adapter

Solar_Light_ Pipe_Adapter_1.stl

Power Wheels Battery Adapter

Low Friction Spool Holder Adapter

Low Friction Spool Holder Adapter

Are you like me and upgraded your bowden tube, but held on to the old one?

Well you are in luck!  Use it as part of this adapter to reduce friction between your spool and the spool holder.

Designed primarily for the Ender 3, but any similar spool holder should work.

Yes this is a mashup, however it does have significant changes and qualifies as unique work.  See license.txt for more details.

1. Cut two bowden tubes to fit in side of each track.
2. Remove the tube from your spool holder and snap on the adapter.
3. Put the tube back on the spool holder.
4. Enjoy

- Easy snap fit!
- Bowden tubes are low friction by design.
- The curved shape further reduces friction by limiting contact with the spool to two points.
- The curved shape uses gravity to keep the spool centered on the spool holder.

Supports are required. I would suggest using support blocker on the bowden tube holes, they seem to print fine.  

* I used tree supports and a brim.
* I printed at 5° hotter than normal to help with layer adhesion.
* I printed at 0.12 for a smoother look. However during testing I printed at 0.2 and it worked without issue.


Sidewinder X2 Mosquito-LGX Adapter.stl

An easy drop in ABL probe relocation bracket made by TheInappropriateMaker on Thingiverse that is super simple to use. 
Unfortunately it was just a tad bit too short, and it caused a nozzle crash. This is unchanged, however the probe is moved down an extra 2.5mm. 

Original:
https://www.thingiverse.com/thing:5273524

SSD T7 MAGSAFE HOLDER FOR IPHONE / IPHONE / MAGSAFE / PHONE ACCESSORIES

SSD_T7_HOLDER.stl

3" Exhaust Adapter for Porter Cable Jointer

JointerExhaustAdapter.stl

VIVO Dual Monitor VESA Bar Mount

Veevo_Dual Montitor_Vesa_Bar Mount.3mf

Camera Mount 7

Camera Mount 7.stl

Timemore C2 to Wide Mouth Jar

timemore-c2-to-mason-jar-Body003.stl

Universal Smartphone Adapter for Thrustmaster Ferrari Add On 

Clamp_B.stl

CYD adapter for Anycubic Mega series printers

cyd mega.stl

Adapter

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

DB9 Banana Plug Adapter

Hose Reductor (For Crank Case Vent)

Lossless Adapter Desk Mount

Refill Riser for WILD Deodorant Dispenser

Lumix G Vario 14-42 67mm adapter ring

MattMill Student Grain mill fastener and funnel adapter

Milwaukee M18 Vacuum to tool dust collector adapter

Klein Precision to 1/4" Bit Adapter

E3D V6 Hotend easy maintenance carriage for Felix 3D printer

Solar Light Pipe Adapter

Power Wheels Battery Adapter

Low Friction Spool Holder Adapter

Sidewinder X2 Mosquito-LGX Adapter.stl

SSD T7 MAGSAFE HOLDER FOR IPHONE / IPHONE / MAGSAFE / PHONE ACCESSORIES

3" Exhaust Adapter for Porter Cable Jointer

VIVO Dual Monitor VESA Bar Mount

Camera Mount 7

Timemore C2 to Wide Mouth Jar

Universal Smartphone Adapter for Thrustmaster Ferrari Add On

CYD adapter for Anycubic Mega series printers