Spectra Seraph

Ghost_Angel_Alien.stl

Insight Unveiled :Revelations of Dionysus

face1.stl

Valentine's Spinning Lock (Remix of Blank Love Locks for Remixing)

Valentine's Spinning Lock.stl

Abstract 4 parts Clay Cutter for Polymer Clay | Digital STL File | Clay Tools | 4 Sizes Summer Clay 

abstract 4-parts-35mm sharp.stl

Lobe Planter ~ Collection Series

Lobe_Planter_36233.stl

Serac Vase 80mm

This piece is part of a set of four vases is inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: 
Serac Vase 100mm: 
Serac Vase 120mm: 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


VENOM GHOST SCULPTURE ABSTRACT / HOMEDECOR / HALLOWEEN

VENOM GHOST SCULPTURE.stl

Meditative Muse: Incense Holder

texturizeincese.stl

Abstract Deer Sculpture – Modern Minimalist Statue

Abstract deer.stl

Abstract Mother and Child.stl

Here's my last gift for you guys for this year's Mother's Day ☺️

I wanted to create something a bit different for this model.
So I thought...why not trying making an abstract sculpture?

Something that could be elegant and classic, but also that represents the warmth and love of a mother for her child.

Hope you will enjoy printing this statue 🥰
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printer: Fokoos Odin-5 F3
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.2 mm (3 walls thickness; 8 top / 3 bottom layers)
🔸 Infill : 10%
🔸 NO Support
🔸 Printing Temperature: 212°C / Build Plate Temperature: 60°C
🔸 Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
🔸 Filament: Marble PLA by SUNLU
🔸Size: 9,8 x 7,2 x 12,4 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Abstract Mother's Day Statue.stl

Abstract Mother's Day Statue (V1) [White PETG]

Abstract Mother's Day Statue (V2) [White PETG]

Abstract Emotional Faces Sculpture – Expression Art Bust

Man's emotions.stl

Coral Reef Headphone Stand | Aesthetic Marine Art

headset-stand.stl

Echoes of Antiquity: The Heart's Embrace

completo.stl

250 Mega Bundle Clay Cutter for Polymer Clay | Digital STL File | Clay Tools

earrings 04-35mm.stl

Curved Vase with Wavy Texture (vase mode)

Curved vase with wavy texture.stl

Abstract Boho Shape 03 Clay Cutter for Polymer Clay | Digital STL File | Clay Tools | 4 Sizes

abstract Boho 03-35mm sharp.stl

Modern Sculptural Vase (vase mode)

Modern Sculptural Vase by Slimprint.stl

Cotton - Forma Vase Collection 

Cotton.stl

Serac Vase 120mm

This piece is part of a set of four abstract vases inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: https://social.thangs.com/m/491853 
Serac Vase 100mm: https://social.thangs.com/m/491867 
Serac Vase 120mm: 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

Abstract

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Spectra Seraph

Insight Unveiled :Revelations of Dionysus

Valentine's Spinning Lock (Remix of Blank Love Locks for Remixing)

Abstract 4 parts Clay Cutter for Polymer Clay | Digital STL File | Clay Tools | 4 Sizes Summer Clay

Lobe Planter ~ Collection Series

Serac Vase 80mm

VENOM GHOST SCULPTURE ABSTRACT / HOMEDECOR / HALLOWEEN

Meditative Muse: Incense Holder

Abstract Deer Sculpture – Modern Minimalist Statue

Abstract Mother and Child.stl

Abstract Emotional Faces Sculpture – Expression Art Bust

Coral Reef Headphone Stand | Aesthetic Marine Art

Echoes of Antiquity: The Heart's Embrace

250 Mega Bundle Clay Cutter for Polymer Clay | Digital STL File | Clay Tools

Curved Vase with Wavy Texture (vase mode)

Abstract Boho Shape 03 Clay Cutter for Polymer Clay | Digital STL File | Clay Tools | 4 Sizes

Modern Sculptural Vase (vase mode)

Cotton - Forma Vase Collection

Serac Vase 120mm

ZigZag Christmas Ornament