Abstract Musical Wall Art

1.stl

3D Printed Painting - Shells

Shells Square_Front_224x224.stl

3D Printed Painting - Cyborg

Cyborg Head Square_Front_224x224.stl

3D Printed Painting - Astronaut

Astronaut Square_Front_224x224.stl

3D Printed Painting - Fall Leaf Pile

Leaves Square_Front_224x224.stl

3D Printed Painting - Ship at Sunset | No AMS Needed!

Boat Square_Front_225x225.stl

3D Printed Painting - Yggdrasil

Planet Tree Square_Front_225x225.stl

3D Printed Painting - Robot Profile

Robot Square_Front_224x224.stl

Abstract Vase (Design1)

AbstractVase(Design1).stl

Abstract Art Bowl

Abstract Art Bowl.stl

Sculpture.stl

urchin.stl

Unwrapped Icosaeder Star Sharp

Unwrapped Icosaeder Star Sharp.stl

Icosaeder Star Small Single.stl

Unwrapped Icosaeder Star Small

Unwrapped Icosaeder Star Small.stl

Stinkhorn Vases

Stinkhorn Vase 1.stl

Teegarden Vase

A unique home décor piece collected from a recent trip to a nearby exoplanet. I think it is the husk of an alien plant species. If interstellar space travel is not an option for you, you could 3D print it.

See here for video: https://youtu.be/GhgLM8f0nVY 

Model shown is printed in Sovol PLA Silk Magic “Green & Purple & Copper.”


Abstract Art Coaster v5

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

Deco Bird

A derocative bird statue of a bird. 

Can be printed in different sizes.

Support might be needed for the bottom overhangs. 

No supports needed for nose and top.

Serac Vase 140mm

This piece is part of a set of four abstract vases inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: https://social.thangs.com/m/491853 
Serac Vase 100mm: https://social.thangs.com/m/491867 
Serac Vase 120mm: https://social.thangs.com/m/491883 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Abstract art

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 588 new models

3D Printed Painting - Shells

3D Printed Painting - Cyborg

3D Printed Painting - Astronaut

3D Printed Painting - Fall Leaf Pile

3D Printed Painting - Ship at Sunset | No AMS Needed!

3D Printed Painting - Yggdrasil

3D Printed Painting - Robot Profile

Abstract Vase (Design1)

Abstract Art Bowl

Sculpture.stl

Unwrapped Icosaeder Star Sharp

Icosaeder Star Small Single.stl

Unwrapped Icosaeder Star Small

Stinkhorn Vases

Teegarden Vase

View 17 new models

ZigZag Christmas Ornament

View 10 new models

Serac Vase 140mm