Járngandr Articulated Dragon

Járngandr Articulated Dragon.3mf

Aurelius Articulated Dragon Mesh Mayhem

Aurelius Articulated Dragon Mesh Mayhem.3mf

Voron BigTreeTech 4.3" PI TFT Mount - Hex & LDO designs!

BTT_4.3_Voron_Mount_MRLY_Remix_V3.step

Social Media Calibration Cube - Flex your precision!

Calibration_Cube_Social_Medias_V1.step

Fallout 76 Throwing Knife - Video Game Prop

throwing-knife-left.stl

Multiboard hooky hook - 45mm

45mm hooky hook.step

Voron V0.1 Flow Rate Test Race Track - 100mm Flowrate Test

Voron_V0_FlowRate_Test_V3.step

Clearance Conveyor

Assembly View Only (Do Not Print).3mf

Articulated Dragon 6 

meshmayhem_articulated_dragon_006.stl

Retro UFO

ufo-top.stl

XYZ Calibration Test - Vase Mode

Quick 10 minute print - 0.3 m of filament

Don't waste your precious time and filament printing a so called “calibration cube”!

This quick print provides clues for all the important features and settings:

Extrusion width
E-steps / rotation distance (X, Y, Z)
Bridging
Cooling
Overhangs
Speed / accelleration
First layer / bed adhesion
Retraction (stringing test, seam test)
Preassure advance / linear advance
Print Settings
1 perimeter
0.2 mm layer hight
3 bottom layers
Disable “Ensure vertical shell thickness” (PrusaSlicer)
No Infill, top layers, brim or supports

**Troubleshooting**
https://www.reddit.com/r/3Dprinting/wiki/troubleshootingandcalibration

Some quick tipps:

_**Extrusion width**_
Check if the thickness of one of the outside walls at the top matches the setting in your silcer
**_E-steps / rotation distance (X, Y, Z)_**
If the outside dimensions are not 20 mm but way off, correct the settings for the affected axis
**_Bridging / cooling_**
If the bridging perimeters in the top center are drooping/sagging, check cooling an bridging settings in your slicer
45° overhangs
If the perimeters in this section are drooping/sagging, check the part cooling and cooling settings in your slicer
**_Speed / accelleration_**
ringing, bulged corners - you may want to reduce speed and/or accelleration (also see Preassure advance / linear advance)
**_First layer / bed adhesion_**
If there are problems with the print adhering to the bed, check if
- the bed is level and parallel to the x-axis
- the bed is clean - no dirt or grease
- the bed temperature is correct
If the print is wider at the bottom (first few layers) than at the top, check your z-offset and first layer settings
**_Retraction (stringing test)_**
If you experience stringing, check your retraction and cooling settings
**_Preassure advance / linear advance_**
If large seam gaps or bulged corners appear, consider tuning your printer firmware settings for preassure advance (Marlin) / linear advance (Klipper)

XYZ Calibration Test

Marble Clock "Time Rolls On"

clock base.stl

Creality Hi Tool Box – Ultimate Multicolor Storage

Creality Hi Multicolor Box Lid Frikarte3D.3mf

Groovy 70s Stackable Flower Tray: Color-Coding, Space-Saving Organizer for Little Knick-Knacks

3d Printing

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Járngandr Articulated Dragon

Aurelius Articulated Dragon Mesh Mayhem

Voron BigTreeTech 4.3" PI TFT Mount - Hex & LDO designs!

Social Media Calibration Cube - Flex your precision!

Fallout 76 Throwing Knife - Video Game Prop

Multiboard hooky hook - 45mm

Voron V0.1 Flow Rate Test Race Track - 100mm Flowrate Test

Clearance Conveyor

Articulated Dragon 6

Retro UFO

XYZ Calibration Test - Vase Mode

Marble Clock "Time Rolls On"

Creality Hi Tool Box – Ultimate Multicolor Storage

Groovy 70s Stackable Flower Tray: Color-Coding, Space-Saving Organizer for Little Knick-Knacks

Hourglass Vase for Elegant and Simple Home Decor

SlideCleat Big Thread for Multiboard

Funko Pop Style Dragon Mesh Mayhem

Voron Hex Pattern StealthBurner Toolhead

Indianapolis, IN - Small

BigTreeTech U2C Mount - CAN we do it?! Yes, we CAN!