Heat gun holder

For mounting heat guns on the wall. Small radius 63mm, large radius 68mm. I printed mine in PETG and mounted it to the side of an Ikea cabinet.
Check out [the video](https://youtube.com/shorts/gfbUjfd7MeE?feature=share). 

HMG7.2 ADXL345 22.5mm Horizontal Mount.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**


 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**


Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.


So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 


If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.


If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com


If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Powermod Spool Holder - For Kingroon and other external power supplies

Kingroon PS Base PlateNew.stl

Voron BigTreeTech 4.3" PI TFT Mount - Hex & LDO designs!

BTT_4.3_Voron_Mount_MRLY_Remix_V3.step

BigTreeTech U2C Mount - CAN we do it?! Yes, we CAN!

BTT U2C VHB v2.step

Ender 3 V2 Neo Filament Sensor Mounting Bracket

Filament Sensor Mount Mk.2.STL

10 kg Spool Holder

assembled view.stl

Maker Multitool - The Ultimate 3D Printing Nozzle Brush

Maker Multitool

THE WALL OF 3D PRINTING

you can use screws or just tape to attach it as i did 

San Diego Temple - Taito 3D Printing Services

temple - Main_Model.stl

Neptune 3 / Neptune 4 Max & Plus - Gantry Cable Mount - NO MORE DRAGGING!!

Strain Relief Thin v1.step

Wall mount filament spool

Just a simple wall mount that I designed around some Inland brand spools I had.  Works for all kinds of spools, but has a lip designed to keep certain spool varieties in place.  A great way to keep your most used filaments handy next to your 3D printer.

Woman Power Logo Phone Holder

Woman Power Phone Holder Frikarte3D.stl

Neptune 3 Pro - Gantry Cable Mount - NO MORE DRAGGING!

Neptne_3_Cable_Mount_V2.step

Original MakerBot Replicator CAD - REPAIRED! 

**Make a MakerBot! Replicate with a Replicator!**

This is the Original MakerBot Replicator CAD file.  It is still available for download on Thingiverse HERE, but the files are missing some key components and it will not open properly in Fusion 360 or other CAD softwares. For my "Project ReAniMaker" build I had to spend some time sourcing the missing components and updating the file naming structure so it could be imported into Fusion 360.  

I make no claims of ownership over this design.  I just reconstructed the original CAD project file for  use in modern CAD software so others don't have to jump through the same hoops.  Also I colored various components in Fusion 360 so that they can be more easily visually seperated. I'm sharing this under the same "CC-SA" aka "Creative Commons Share-Alike" license as the original project is on Thingiverse.

Find MakerBot here:

You can find the design files for my "Project ReAniMaker" here: 

---------------------------------------------------------------

 **Files Included:**
- STEP File Version
- F3D Fusion 360 Version

---------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.MandicReally.com/links

---------------------------------------------------------------



MakerBot Replicator Core-XY Conversion - Project ReAniMaker

ReAniMaker_MakerBot_Replicator_Core_XY_V6.step

XYZ Calibration Test - Vase Mode

Quick 10 minute print - 0.3 m of filament

Don't waste your precious time and filament printing a so called “calibration cube”!

This quick print provides clues for all the important features and settings:

Extrusion width
E-steps / rotation distance (X, Y, Z)
Bridging
Cooling
Overhangs
Speed / accelleration
First layer / bed adhesion
Retraction (stringing test, seam test)
Preassure advance / linear advance
Print Settings
1 perimeter
0.2 mm layer hight
3 bottom layers
Disable “Ensure vertical shell thickness” (PrusaSlicer)
No Infill, top layers, brim or supports

**Troubleshooting**
https://www.reddit.com/r/3Dprinting/wiki/troubleshootingandcalibration

Some quick tipps:

_**Extrusion width**_
Check if the thickness of one of the outside walls at the top matches the setting in your silcer
**_E-steps / rotation distance (X, Y, Z)_**
If the outside dimensions are not 20 mm but way off, correct the settings for the affected axis
**_Bridging / cooling_**
If the bridging perimeters in the top center are drooping/sagging, check cooling an bridging settings in your slicer
45° overhangs
If the perimeters in this section are drooping/sagging, check the part cooling and cooling settings in your slicer
**_Speed / accelleration_**
ringing, bulged corners - you may want to reduce speed and/or accelleration (also see Preassure advance / linear advance)
**_First layer / bed adhesion_**
If there are problems with the print adhering to the bed, check if
- the bed is level and parallel to the x-axis
- the bed is clean - no dirt or grease
- the bed temperature is correct
If the print is wider at the bottom (first few layers) than at the top, check your z-offset and first layer settings
**_Retraction (stringing test)_**
If you experience stringing, check your retraction and cooling settings
**_Preassure advance / linear advance_**
If large seam gaps or bulged corners appear, consider tuning your printer firmware settings for preassure advance (Marlin) / linear advance (Klipper)

XYZ Calibration Test

Gridfinity 7x Nozzle holder - E3d Nozzle Pro Pack.stl

This 2x1x3 piece can hold 7 v6 3d printer nozzles. The labels are ideal for the E3d Nozzle Pro Pack and one extra standard 0.4 mm brass nozzle, which is included with most printers by default. 

The model is heavily inspired by onelostcauses design: https://thangs.com/designer/onelostcause/3d-model/Gridfinity%20E3D%20V6%20Nozzle%20Fun%20Pack%20Holder.stl-62001

Gridfinity by Zack Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

Remix of "I Love 3D Printing" Remixing Mug

This file is intended for remixing! Download it, import into your favourite mesh editing software and do as much damage to it as you can! 

Once you’re ready to print why not test the limits of your printer? Crank up the speed, change the extrusion rate, what other parameters can you play with?

No matter what you do, just hit print and walk away! However it turns out will be the perfect, if not ironic, testament to your love of 3D printing! It will also a great gag gift for the other 3D printing enthusiasts in your life.

The model here demonstrates modifications that simulate clogged nozzles, layer shifts, and poor layer adhesion: https://social.thangs.com/m/491441 . 

See here for video of modified version: https://youtu.be/FJbw00gRW_4 


"I Love 3D Printing" Remixing Mug

3D printing

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Heat gun holder

View 510 new models

View 13 new models

Voron BigTreeTech 4.3" PI TFT Mount - Hex & LDO designs!

BigTreeTech U2C Mount - CAN we do it?! Yes, we CAN!

Ender 3 V2 Neo Filament Sensor Mounting Bracket

10 kg Spool Holder

Maker Multitool - The Ultimate 3D Printing Nozzle Brush

THE WALL OF 3D PRINTING

San Diego Temple - Taito 3D Printing Services

Neptune 3 / Neptune 4 Max & Plus - Gantry Cable Mount - NO MORE DRAGGING!!

View 11 new models

Woman Power Logo Phone Holder

Neptune 3 Pro - Gantry Cable Mount - NO MORE DRAGGING!

Original MakerBot Replicator CAD - REPAIRED!

MakerBot Replicator Core-XY Conversion - Project ReAniMaker

View 25 new models

Gridfinity 7x Nozzle holder - E3d Nozzle Pro Pack.stl

Remix of "I Love 3D Printing" Remixing Mug

View 15 new models