Introducing the Rytek "Main Street" 1/64 Scale Buildings, these 3D printed models are designed to enhance your scale diorama experience like never before. This intricately detailed structure brings authenticity and depth to your diorama, adding a realistic urban environment for your cars to navigate. There are 3 versions of the walls, bricks, slats, and plain walls and each has two different heights so your buildings can have added depth. The rooftop AC serves as a battery compartment if you add lights. The model is designed for 3mm led lights. The light housings glue together and then to the roof and all of the windows frames and signs also glue into place. It is not designed for the rooftop to be glued to the roof, or the roof to be glued to the walls. The base can be printed in single color or multicolor to add more depth, or you can print everything in white and paint them yourself. The front door swings and is print in place!
COMMERCIAL LICENSE - With your active support to Rytek through this Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.
Recommended Printing settings - 0.4mm Nozzle Printing at 0.20mm Standard settings in bambu Studio Filament type: PLA Infill % : 15% Infill Pattern: Gyroid Supports: Yes - standard and SNUG Brim: No Raft: N0 Skirt: No