Hi everyone, today I have for you a diecast car garage! This is the first design I've done in a month, December proved to be difficult as my dad passed away and I had covid. But I'm back at it and have a few fun files for you!
This garage fits Hot Wheels and Matchbox cars, it prints in multiple pieces and the only part that was printed multicolor is the front sign. The letters are raised so if you single color print it, you can paint it with acrylic paint.
The street lamp is a bit funny to print in a good orientation, but with tree supports it turns out pretty good, it is a snug fit using silk PLA, I did use a razor to thin out the peg a little bit.
The main door swings if you dont glue it in place, the garage should be glued into the base though. The garage doors slide in and out easily.
The tire stack is now 4 tires high, not 3 as pictured.
Recommended Printing settings - 0.4mm Nozzle Printing at 0.20mm Standard settings in bambu Studio Filament type: PLA Infill % : 15% Infill Pattern: Gyroid Supports: Yes, tree supports for the lamp top and bench (the back of the bench should be on the buildplate), regular supports for the garage. Brim: No Raft: N0 Skirt: No COMMERCIAL LICENSE - With your active support to Rytek through this Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.