This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/Vc2qg9umKLM 

See here for other 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034 


The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for single unit bins:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 

See here for 2x2 bins:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082 
Chain Link Gridfinity Bin 2x2 80mm: https://social.thangs.com/m/714105 



Chain Link Gridfinity Bin 1x2 100mm

This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/Vc2qg9umKLM 

See here for other 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for single unit bins:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 


This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/Vc2qg9umKLM 

See here for other 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034 


The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for single unit bins:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 

See here for 2x2 bins:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082 
Chain Link Gridfinity Bin 2x2 80mm: https://social.thangs.com/m/714105 


Chain Link Gridfinity Bin 1x2 80mm

This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/Vc2qg9umKLM 

See here for other 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm:
Chain Link Gridfinity Bin 1x2 100mm:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for single unit bins:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 


The first [Rejected Animals](https://www.instagram.com/rejected.animals) model designed for resin printing is Mozz!

About 5.5" tall assembled 

The photographed base was custom modeled by 3D pen, but I've included a simple base with pegs connecting to the feet. Feedback is appreciated, and I will do my best to make any necessary improvements!

[Relevant Video](https://youtu.be/-Gukk_KGTgc)
 

Rejected Animals // Mozz

body.stl

Chain Link Gridfinity Bin 1x2 60mm

This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/Vc2qg9umKLM 

See here for other 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm:
Chain Link Gridfinity Bin 1x2 80mm:
Chain Link Gridfinity Bin 1x2 100mm:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for single unit bins:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 


The animal that represents Easter is the bunny. So, for Easter, I made a foldable bunny character.

The shape and structure are based on the Pokemon Pikachu I made previously.

So we designed it so that the head, ears, arms, and feet can move.

Above all, we designed it to be very easy to make. However, there are some caveats.

Be sure to remove the supports connected to the ears on the inside of the head and the supports connected to the arms of the torso.

The parts of the eyes and cheeks are different on the left and right, so please check before attaching them with adhesive.

Please check the video for more details.
https://youtu.be/fkC3jWILTBc

We hope you have a happy Easter with this Easter Bunny!

Happy easter!

Largest part in printing, size= X 64mm, Y 88mm, Z 36mm, After full assembly size= X 60mm, Y 56mm, Z 98mm

Total Build Time : 10h 59m / Plastic Weight : 40g

Design by GOODesign

Foldable Easter Bunny based on Pikachu

GOODsign_Easter_Bunny_Body_A.stl

Chain Link Gridfinity Bin 1x2 40mm

This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/Vc2qg9umKLM 

See here for other 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm:
Chain Link Gridfinity Bin 1x2 60mm:
Chain Link Gridfinity Bin 1x2 80mm:
Chain Link Gridfinity Bin 1x2 100mm:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for single unit bins:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 


This tree decoration has captive print-in-place ornaments. Once printed they twist loose and rotate freely within the boughs of the tree. 
 
See here for video: https://youtu.be/iUhaGNJOFGk 

This design is particularly suited to printing with multicolour filament as rotating the ornaments allows for visualization of the different filament colours.

This model features the tricolour “Silk Red & Green & Blue” filament by Eryone.

This is an advanced print requiring a well calibrated machine and quality filament. Good layer adhesion is important.

Print the tree upside-down with the top portion fully supported. 

Once printed, allow the print to cool. Wiggle each ornament back and forth until it breaks from the small internal supports.  Twist it a few times until it turns smoothly.

If an ornament does break off while twisting it loose, you can just glue it back in place.


Twist Tree.stl

This tree decoration has captive print-in-place ornaments. Once printed they twist loose and rotate freely within the boughs of the tree. 

See here for video: https://youtu.be/iUhaGNJOFGk 

This design is particularly suited to printing with multicolour filament as rotating the ornaments allows for visualization of the different filament colours.

This model features the tricolour “Silk Red & Green & Blue” filament by Eryone.

This is an advanced print requiring a well calibrated machine and quality filament. Good layer adhesion is important.

Print the tree upside-down with the top portion fully supported. 

Once printed, allow the print to cool. Wiggle each ornament back and forth until it breaks from the small internal supports.  Twist it a few times until it turns smoothly.

If an ornament does break off while twisting it loose, you can just glue it back in place.


I designed one more Easter egg for the upcoming Easter. This design features a foldable jack o lantern structure that makes it easy to fold and unfold with just one print.

Download Foldable Jack O lantern - https://than.gs/m/1164332

Best of all, this Easter egg is designed to allow light to flow through a hole in a nice pattern.
Inside, IKEA's LED tea light candle (GODAFTON / MOGNAD) is used as a lighting.
Only the correct size does not matter does not have to be a product of IKEA.
※ Never turn on a real candle. ※

I designed the pedestal to use this Easter egg as a light. This pedestal fits well even with the previously designed folding Easter egg.

Download Foldable Easter egg - https://than.gs/m/1312807
Of course, you can also fill in the empty space inside this Easter egg with candy or chocolate.

Happy Easter.

Print and how to use with Prusa i3 mk3 - https://youtu.be/2J-pGy1l5Is
Print and how to use with Ender 3 pro - https://youtu.be/7PHGa5c0MOw
Print and how to use with CR10s pro - https://youtu.be/pTCHhhwsXRU
Print and how to use with Anet ET5 -https://youtu.be/SQ_AQ_meZjU
Review from BuildaNerd - https://youtu.be/yLX_X51B0wM

It is okay for you to personally present this Easter egg, but it is forbidden to print and sell this design. If you want to print and sell, please sign a license agreement with FAB365. If you would like to sign a license agreement, please email info@fab365.net.

Design by GOODesign

Easter Egg lights

GOODesign_Easter Egg lights.stl

This 1:8 scale DeLorean front grille was designed for people that would like to build the Ecto-88 Ready Player One version of the DeLorean Time Machine. 

The grille is designed to work together with 8 leds with the following measurements: 2x5x7mm
A chaser that has been programmed with the correct KITT sequence as seen in Ready Player One is available on Etsy: https://www.etsy.com/nl/listing/507224603/led-licht-chaser-volgeling-sequencer (choose the 2x5x7mm Red leds)
Please ask the seller on Etsy to deliver a board that takes 5V. 

Many thanks to Rudy Villalpando for providing me the needed information on the chaser and leds.

1:8 RP1 Ecto-88 DeLorean front grille

Front_grille_RP1_U6.stl

Snowflake Mechanical Box is a 3D printable model that lets you create your own festive and fun box for the holiday season. It is a remix of the [Mechanically Locking Container](https://www.printables.com/model/478901-mechanically-locking-container) by [JamesThePrinter](https://www.printables.com/@JamesThePrinter), but with a snowflake theme. The box has a knob that is shaped like a snowflake, and the box contour is full of snowflakes. The box also has a clever locking mechanism that prevents it from opening unless you twist the knob in the right direction.

**You can watch how I print and assemble here:** [How to 3D Print a Snowflake Mechanical Box for Christmas - Frikarte3D](https://youtu.be/qsn4qgovIGU)

Snowflake Mechanical Box is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. You can also print it in different colors and combinations to create a more colorful and festive look. The model comes with knobs of three different sizes, four bases with different heights, and two lids with different finishes to customize the box. To assemble, you just need to glue the knob to the inner linkage and snap with the mid linkages and outer linkage.

Snowflake Mechanical Box is a great way to store your gifts, candies, or other items for Christmas. It is also a fun and challenging puzzle for your friends and family. You can give it as a gift or use it as a decoration for your home or office.

This model is part of the 🎁 Wrapping Up 2023 Contest 🎁 @Thangs3D, @Anycubic3DPrint #WrappingUp2023 #Christmas #holiday

Download Snowflake Mechanical Box today and enjoy this beautiful and original 3D printable model!

If you like this model, please leave a comment and a rating. Thank you! 😊

This is a REMIX and is protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs unless the original designer has the Commercial Use License that let you sell physical prints of the model.

To sell them legally, message the designer.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Snowflake Mechanical Box

Snowflake Mechanical Box Base 30 Frikarte3D.stl

Snowflake Mechanical Box Base 106 Frikarte3D.stl

These two polyhedra are known as “Golden Rhombohedra” because the diagonals of the faces are the golden ratio. They combine and tile 3D space in ways that are complex and beautiful.

These files have inserts for magnets to make is easier to visualize and understand how they fit together.

These two polyhedra are part of a family of polyhedra known as the “golden isozonohedra.” There are only five golden isozonohedra. The “acute golden rhombohedron” and “obtuse golden rhombohedron” provide here are the most simple, but they can be combined together to form three more golden isozonohedra, the  “Bilinski dodecahedron”, the “rhombic icosahedron,” and the “rhombic triacontahedron.”

See here for video of finished pieces and demonstration on how they fit together: https://youtu.be/AQKMeJGCrfE

The files provided are for one version of the acute golden rhombohedron and two versions of the obtuse golden rhombohedron. Files are provided with or without supports.

The two versions of the obtuse golden rhombohedron are the same shape, but one has magnet holes on all faces, while the other has magnet holes on only half of the faces. Most of the obtuse golden rhombohedra end up on the outside of the final polyhedra and so don’t need magnets on the outside faces. This also helps cut costs in terms of number of magnets needed. Obtuse golden rhombohedra that are contained entirely within the larger polyhedra need to have magnets on all faces, but you’ll only need three of these.

To make all the five golden isozonohedra you will need:
10 acute golden rhombohedra
7 obtuse golden rhombohedra with magnets on three faces
3 obtuse golden rhombohedra with magnets on all faces

The magnet holes fit 1/8” by 1/16” cylindrical magnets. The polarity of magnets on each face must be facing opposite directions, and the pattern must be consistent on every face of every piece in order for all of the faces to snap together interchangeably. Magnets can be press fit with pliers, no glue needed.

The magnets used in the design and assembly of this model were purchased through www.kjmagnetics.com. 


Golden Rhombohedra 

Display only do not print.stl

Free File Friday, 19th of April 2024

Supports: Yes

This mask depending on the scaling is a great gift for kids, dinosaur lovers, furries looking to create a new character, or maybe even an art doll.

...................................................................................................................................................

CAUTION(S)
Teeth can be sharp, sand down before giving to children.

May be a loud toy, consider this before giving to children.

...................................................................................................................................................

Materials needed to complete (wearable)

Print (scaled to your liking)
thin elastic or rubber bands (for hooks on jaw)
thicker elastic (for head strap)
glue (I personally use hot glue)
knife (to score plastic so elastic holds on)
scissors
foamies (Foam sheets) (for chin and padding)

Optional personalization

buckram mesh (for eyes)
fabric of your choosing (for hood)
primer
paint (acrylic)
clay (for custom details; I personally recommend foam clay) (or sculpt in in sculpting software of your choosing)
sandpaper
upholstery foam
duct tape and markers (for patterning)
to scale bust (to make pattern on)
sealant

...................................................................................................................................................

Does not fit
If too large or slides down the face, apply upholstery foam to the forehead (inside) add and subtract till fits properly.

Scaling
I personally scaled to 90%, if you have a scan of your head scale to that instead.

Assembly 
Refer to the video guide to assemble.


...................................................................................................................................................

Q&A
Q: how do I remove teeth
A: If your slicer allows you to "split model into parts", you should be able to delete them

Q: Can I sell this mask as is?
A: no (note: if you see someone selling this mask as is that isn't going by the name "SleepySkeletonStudio" please let me know.)

Q: Can I use this mask to make a commission for customer?
A: Yes, but you must credit me, and the mask will be sold as a collaboration

Q: what other requirements are there to sell this mask?
A: you must make it distinguishable from my design, this can be through painting, furring, adding horns, changing the face shape, ext. 

Q: can I sell masks that all I did was follow your tutorial?
A: No, please read the above question for requirements to sell. 

Dino mask / raptor mask | stl file

topjaw1.stl

The original meaning of Easter is also important, but most people think of eggs and rabbits at Easter. And also, ordinary people think that small sharing with neighbors is a day that brings joy. I designed a rabbit piggy bank with these two things. You can also put coins in this piggy bank, but you can also put small snacks as a gift.
Even if it's not Easter, the piggy bank is still valid. Although there has been a lot less use of coins, there are still many places and areas where coins are used.
So I designed a rabbit piggy bank. Easy to fold, easy to insert and take out coins.

The size of the coin hole is designed to accommodate 25 cents of US coins. It is large enough to fit most national coins.

https://youtu.be/G-jtFxuM-Lc

I hope you will remember the preciousness of small money and the joy of sharing through this piggy bank.

Size, X 76mm, Y 124mm, Z 105mm

Design by GOODesign

Easter bunny bank(Foldable)

GOODesign_Foldable_Bunny_Bank.stl

These dual-color mushroom caps are compatible with all of my previously posted modular mushroom sets! This set comes with a basic gill, stem and bottom attachments to get you going. See below for links to many more compatible mushroom options!  

See here for video: https://youtu.be/AOeaYmY1D0M 

Files for single colour printing are provided as well.

Select a “Cap Surface” file and import it into your slicer along with the “Cap Inside Colour” file. Merge the files and assign them to the appropriate extruder as per your slicer and printer setup.

“Bottom Cap Screw” allows you to use a screw to attach the mushroom to a surface. “Bottom Cap Magnet” has a spot for a 1/4” x 1/8” cylindrical magnet to let you attach the mushroom on to a metal surface. “Bottom Cap Plain” has a plain, smooth surface.

Other Dual Colour Mushroom Caps:
Surfaces: https://than.gs/m/854026 
Stochastic: https://than.gs/m/854062 

Compatible Modular Mushroom sets:
Original Modular Mushroom Set:  https://social.thangs.com/m/53049 
Wavey Modular Mushrooms: https://social.thangs.com/m/335591

This model is entered in the #OutdoorThangs contest!

Dual Colour Modular Mushroom Caps (Stochastic)

Cap Surface 1 single colour.stl

Dual Colour Modular Mushroom Caps (Surfaces)

This vase is part of a set of three. The vases are designed with an aperiodic weave pattern, meaning that the “ropes” all follow a random path around each other and around the surface of the vase. Pick a rope and follow where it goes! Heights are approximately 60mm, 90mm and 120mm.

See here for video: https://youtu.be/IBAU9DO3_Dw 

Download the full set:
Small: https://thangs.com/mythangs/file/794637 
Medium: https://thangs.com/mythangs/file/794640 
Large: https://thangs.com/mythangs/file/794645 



Tangle Weave Vase (Large)

This vase is part of a set of three. The vases are designed with an aperiodic weave pattern, meaning that the “ropes” all follow a random path around each other and around the surface of the vase. Pick a rope and follow where it goes! Heights are approximately 60mm, 90mm and 120mm.

See here for video: https://youtu.be/IBAU9DO3_Dw 

Download the full set:
Small: https://thangs.com/mythangs/file/794637 
Medium: https://thangs.com/mythangs/file/794640 
Large:


Tangle Weave Vase (Medium)

This vase is part of a set of three. The vases are designed with an aperiodic weave pattern, meaning that the “ropes” all follow a random path around each other and around the surface of the vase. Pick a rope and follow where it goes! Heights are approximately 60mm, 90mm and 120mm.

See here for video: https://youtu.be/IBAU9DO3_Dw 

Download the full set:
Small: https://thangs.com/mythangs/file/794637 
Medium:
Large:


Tangle Weave Vase (Small)

This vase is part of a set of three. The vases are designed with an aperiodic weave pattern, meaning that the “ropes” all follow a random path around each other and around the surface of the vase. Pick a rope and follow where it goes! Heights are approximately 60mm, 90mm and 120mm.

See here for video: https://youtu.be/IBAU9DO3_Dw 

Download the full set:
Small:
Medium:
Large:


A tribute to the iconic bond between Leon and Mathilda. This isn't just a fan-art; it's a study of two souls moving through a world that doesn't fit them.

• Resin (SLA/DLP): Absolutely the best choice for these thin, stylized limbs and small details.
• FDM: Only at a larger scale with high-quality supports

The Professionals — A Journey for Two

Leon_SubTool4.stl

Leon_SubTool6.stl

**STEMFIE Small Toy Car**
Rev up your creativity with the STEMFIE Small Toy Car! This durable, easy-to-assemble 3D-printable car is designed for hours of high-speed fun and can withstand the roughest playtimes. It even comes with a charming driver figure, cleverly sporting an adhesive-mount nut as a hat. Download the files, print your car, and let the races begin!

---
**Assembly Tools**
 - [Download the STEMFIE Driver](https://than.gs/m/1230328)

 - [Download the STEMFIE Spanner](https://than.gs/m/1230330)

---
 - **Support the STEMFIE open-source toy**—[join us here on Thangs](https://than.gs/u/6624?plans=true) and be part of our growing community!

 - **STEMFIE news** 👉 [x.com/Stemfie3D](https://x.com/stemfie3d)
---

STEMFIE Small Toy Car

Project - SPS-000008 - Small Toy Car (stemfie.org).3mf

Decorate your home and Easter party with this adorable standalone bunny home decor! 

**"Download All" to get:**
- 3MF file with pre-painted model with the settings I used to print my make (pictured)
- STL file

**Print settings**
- Recommended to print face down on a textured build plate for a fun look!
- 0.2mm layer height
- 0.4mm nozzle

Check out [my March Magnets models](https://thangs.com/search/%22march%20magnets%22%20creator%3A%22karenchaudesigns%22?scope=thangs&view=compact-grid) for the coordinating Kawaii Bunny magnet!

---
For personal use. [Become a member](https://thangs.com/designer/karenchaudesigns?plans=true) for permission to sell physical prints.

Enjoy!
💖Karen

**Connect with me!**
[Linktree](https://linktr.ee/karenchaudesigns)

Kawaii Bunny Home Decor | Easter decoration

home decor bunny_karenchaudesigns.3mf

Multi-color kawaii bunny with optional magnet hole. 
3mf file included.
Compatible with magnets smaller than 16mm wide and at least 2mm thick.

Check out [my other March Magnets models!](https://thangs.com/search/%22march%20magnets%22%20creator%3A%22karenchaudesigns%22?scope=thangs&view=compact-grid)

---

Add magnets to your 3D prints!

**Shop supplies on Amazon:**
- [Magnets with adhesive](https://amzn.to/49TaubS)
- [Magnets](https://amzn.to/3Pw5kLD) & [Glue](https://amzn.to/3KezErc)

As an Amazon Associate I earn from qualifying purchases at no additional cost to you -- thanks for your support!

---
For personal use. [Become a member](https://thangs.com/designer/karenchaudesigns?plans=true) for permission to sell physical prints.

Enjoy!
💖Karen

**Connect with me!**
[Linktree](https://linktr.ee/karenchaudesigns)

March Magnets - Day 11 #marchmagnets | Kawaii Bunny (w/ optional magnet hole) | Cute Easter Bunny

March Magnets_Day 11_Karen Chau Designs.stl

March Magnets_Day 11_Karen Chau Designs.3mf

Hi everyone!
This is my new abstract pot to give your flowers
freshness and new look.🌊💧
This pot can accommodate pots with a diameter of 10.5-11cm and a height of 12cm.

If you liked this design and would like to see more similar designs please click on the like button 💙 and write a comment📃 if you want
Thank you for downloading my design🤗😉
Happy printing!!

Abstract Pot

Pot.stl

This is a variation of my original card box I created for Arkham horror cards, but it doesn't have a tab on the spine for interlocking rows of these boxes.

Instead, this is a simple print-in-place box that has the correct dimensions for standard casino poker cards still in the box. Typically the card boxes are very flimsy so this box will protect your cards after the original box fails.

Interior dimensions are 66 mm x 93 mm which should fit standard Magic: The Gathering cards in protective sleeves or Vegas style poker cards.

As a bonus, you can use this box for other applications like board game cards or whatever. Let me know if you'd like a version without the holes and I can post that as well.

Folding playing card box for Magic: The Gathering or Las Vegas regulation cards

Folding_Poker_Card_Box_V1.stl

Add to your Christmas decor with this lovely two-in-one model! Keep it as a tree or open it to display either a snow man or baby Jesus in a manger!

You can also make it into an ornament to hang on your tree! Simply print Stand_Ornament.stl instead of Stand.stl

3mf files were sliced in Orca Slicer with recommended settings.

**Recommended Hardware**:
2 - 6x3mm magnets
Spare filament for the hinge

**Print Instructions**:
Supports:
- Tree_L: Tree (Auto) supports
- Tree_R: Tree (Auto) Supports
- Stand: Tree (Auto) Supports
- Top hat: Normal (Auto)

Layer height:
- Top hat: 0.12mm
- Everything else: 0.2mm

**Assembly**:
[Watch this video](https://youtu.be/x0xPDScvgVA)

Feel free to join [my discord](https://discord.gg/uqJwERhbxf) for additional support, questions, or suggestions!

Christmas Tree Surprise!

Snow Man.stl

Snowman.3mf

Top hat.3mf

Get ready for spooky season with this spider web lid for the [Desk Grommet System](https://than.gs/m/924318)

[Watch the demo clip](https://youtube.com/shorts/kVGP58gcZes?feature=share)

Download more lids for the Desk Grommet System:
https://www.karenchaudesigns.com/3d/22

Remix these to create your own custom lids to fit your needs:
- (REMIX ME) Hexagon Lid: https://than.gs/m/924379 
- (REMIX ME) Round Lid: https://than.gs/m/924377


Spider Web Hexagon Lid for Desk Grommet System | Halloween Desk Decor

Get ready for spooky season with this spider web lid for the [Desk Grommet System](https://than.gs/m/924318)

Watch the demo clip

Download more lids for the Desk Grommet System.

Remix these to create your own custom lids to fit your needs:
- (REMIX ME) Hexagon Lid: https://than.gs/m/924379 
- (REMIX ME) Round Lid: https://than.gs/m/924377


✊

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Chain Link Gridfinity Bin 1x2 100mm

Rejected Animals // Mozz

Foldable Easter Bunny based on Pikachu

Twist Tree.stl

Easter Egg lights

1:8 RP1 Ecto-88 DeLorean front grille

Snowflake Mechanical Box

Golden Rhombohedra

Dino mask / raptor mask | stl file

Easter bunny bank(Foldable)

Dual Colour Modular Mushroom Caps (Stochastic)

Tangle Weave Vase (Large)

The Professionals — A Journey for Two

STEMFIE Small Toy Car