This is a SpillNot
I saw a cool video online and was bummed I could not buy it where I live so I designed my own to 3D print ( works just like the original )
You will need a rope to complete the design and also a pad if you wish to transport hot beverages
It works just like the original and allows you to climb stairs, run and move a lot without fear of spilling your drink !

There is also a 14 cm version should you prefer anything shorter


no spill cup transporter 20cm.stl

This is a SpillNot
I saw a cool video online and was bummed I could not buy it where I live so I designed my own to 3D print ( works just like the original )
You will need a rope to complete the design and also a pad if you wish to transport hot beverages
It works just like the original and allows you to climb stairs, run and move a lot without fear of spilling your drink !

There is also a 20cm version should you need something taller

no spill cup transporter 14cm.stl

This is a can holder that fits the 33cl tall coca cola can ( and should fit others of same dimension )
Designed to fully enjoy the can drinking experience without having to deal with the condensation on the can of the sensation of holding something cold ^^
Checkout my profile for other can holder dimensions

can holder 33cl ( tall coca cola can compatible )

This is a can holder that fits the 33cl small heineken ( and should fit others of same dimension )
Designed to fully enjoy the can drinking experience without having to deal with the condensation on the can of the sensation of holding something cold ^^
Checkout my profile for other can holder dimensions


can holder 33cl ( stubby heineken can compatible )

This is a can holder that fits the 25cl red bull can ( and should fit others of same dimension )
Designed to fully enjoy the can drinking experience without having to deal with the condensation on the can of the sensation of holding something cold ^^
Checkout my profile for other can holder dimensions


can holder 25cl ( red bull can compatible )

This is a filament holder that uses a 2cm in diameter rod ( I used a curtain holder with I salvaged )
The caps are to prevent the rod from sliping of the holders laterally upon usage
Unlike the spool holder with is a very similar model I design, the filament holder has the needed wall clearance to allow you to use it for 3d printing ( the spool holder does not )


3d printer filament holder.stl

This is used to elevate the main unit of a CR10 of the ground / whatever you put in on in order to allow better airflow from the output fan ( with is under )
You will need 2 ( front and back )

CR10 motherboard elevation.stl

This is a filament redirection to allow you to have the filament being inputted from any direction you want.
It needs a bowden tude and a connector such as the one already used by your printer
It was designed for the CR10 but should also work for similar 3d printers
It does not need any glue to be hold into place ( you may still use some if you prefer )

CR10 filament redirection.stl

This is a filament redirection to allow you to have the filament being inputted from any direction you want.
It needs a bowden tude and a connector such as the one already used by your printer
It was designed for the CR10 but should also work for similar 3d printers

This is a wall mounted spool holder

It required a total of 4 mollies and 4 screws + whatever kind of rod ( 2 cm in diameter or less ) you can find

The caps are glued to the rod to prevent sideways movement and ensure that the rod stays on the supports

This version is not suited for 3d filament as it is ( not enough clearance ), It can be stretched or printed larger should you really want to use it anyways.

I will be designing a version specifically for 3d filament


wall mounted spool holder

spool holder and cap x2.stl

A wall mounted cup holder to prevent spills on your desk or workplace
Accommodates most cups and glasses

wall mounted cup holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

happytrigger42