#Gridfinity Bendy McLampface

McLampface.stl

Gridfinity 1x5 Cable and Charger Holder

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for US-style wall plugs and cables. Prints well with 0.4 or 0.6 nozzle.

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode.

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints well with 0.4 or 0.6 nozzle. 

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode. Tolerances are tight at ~0.5 mm due to the sizes of the batteries and needing to stick to 3-unit-wide model, but this should be achievable with pretty much any printer. For best printing, only adjust horizontal expansion if necessary to fit the batteries since the walls are all modeled to multiples of 0.4mm. Changing horizontal expansion will likely increase print time and reduce quality.

#Gridfinity Parametric Bit Holders

1x2 Bit Holder.stl

#Gridfinity Paint Shelf

This item is for use with the [#GridFinity system](https://www.youtube.com/watch?v=ra_9zU-mnl8) by Zach Freedman.

This is a 3x4 stepped paint shelf compatible with AK and Vallejo 24mm squeeze bottles.

#Gridfinity

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

#Gridfinity Bendy McLampface

Gridfinity 1x5 Cable and Charger Holder

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

#Gridfinity Parametric Bit Holders

View 11 new models