A Cylinder Pencil Holder with a diamond texture. A desk organizer with a modern appeal.

Print time: 5 - 7 hours at 100% scale (depending on settings) Dimensions: 6.9 x 9 cm (diameter x height)

Tip: make sure your retraction settings are properly calibrated to be sure you can print a small calibration tower test.

If you have questions, please send me a message.

Happy printing

3D printer settings

Nozzle: 0.4 mm Layer height: 0.2 - 0.3 mm 2 walls 5 - 10% infill 35 - 45 mm/s print speed