#Gridfinity Usb and SD Card Holder
This item is for use with the #GridFinity system by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8
A 1 wide by 2 deep by 1/2 unit high USB thumb drive and SD card holder for use on a weighted base plate.
UPDATE 2
As requested, I've added a USB only version with 8 slots to the archive. Please note they are angled due to the fact that the bodies of most USB drives are too wide to fit 2 columns/rows in parallel.
UPDATE I've added three additional STL files, one with a double height 10x Standard SD card version which is stack-able, a single height 10x Standard SD card version which is not and a half height 16x Micro SD card version which is stack-able. Please note that due to the depth required for the micro SD card and to keep the bin at half height the slots intersect with the screw holes on the bottom of the bin. You will be able to use magnets but not m3 screws.
Contrary to Zach's instructions, I've been printing all my modules with a 0.8 nozzle, which seems to work just fine. This item was printed with silver PLA at 75mm speed on an ender 3 pro with 0.8 nozzle and 0.32 layer height without support. The holder has slots for 4 USB Devices, 6 Standard SD cards and 6 Micro SD cards. The Standard slots are capable of holding 2 Memory Stick Duo's for all you PSP fans and even xD cards for you retro Fujifilm camera users. Tolerances are loose to allow the model to be printed easier on poorly configured printers that over extrude.
#Gridfinity Usb and SD Card Holder
Gridfinity 2x1 USB SD SD-Micro Combo.stl
Gridfinity SD Card Holder (MicroSD Usb A and C)
Gridfinity SD - USB Holder 2x3
gridfinity SD card and USB holder
Gridfinity SD USB Holder 2x2
Usb and SD card gridfintity
Gridfinity SD Card Holder
Remix - Gridfinity The One SD Card Holder by atucom
Gridfinity 1x3 USB SD Storage
Gridfinity USB & Micro SD Holder
Gridfinity USB Thumb Drive SD MicroSD TF SDXC SDHC SDUC T-Flash TransFlash holder
micro SD USB holder.stl
Gridfinity Raspberry Pi Model 4B Case V2
Modular Organizer
USB, Micro SD & SD Card Holder - BackToSchool - Desk Tidy
Desktop Organizer for USB, SD Card, Micro SD (Custom Name)
Holder for USB, SD, Micro SD + Plexgear card reader
Remixed SD Card & micro SD Card Box with USB Stick Holder
USB & SD Card Holder Organiser Storage
Way too much extra tolerance. The USB sticks just flop around and fall out if you turn it upside down.
Not going to argue you on this point, but why in the world would you turn it upside down?
thanks a lot for sharing your work.
Sweet, thanks for the USB! Appreciate it so much!
Thanks so much! These are pretty great, I'm printing the microSD one now. Any chance you can create one that's just USB?
It is done, added USB Only.STL to the archive.
Of Course, I'll do it now.
Great idea! Could you also make versions that are are just standard or micro SD cards as well as deep enough to be stackable?
I've added three additional STL files, one with a double height 10x Standard SD card version which is stack-able, a single height 10x Standard SD card version which is not and a half height 16x Micro SD card version which is stack-able. Please note that due to the depth required for the micro SD card and to keep the bin at half height the slots intersect with the screw holes on the bottom of the bin. You will be able to use magnets but not m3 screws.
Sure, I'll work on one for you right now.