Original feet of Logitech ERGO K860 keyboard are very fragile. Mine lasted only couple of days. After trying to fix them a few times with (a strong) glue, I designed these stronger replacements.

https://youtu.be/2S06gbFDfJY

I printed these in PETG, 0.175mm layers, 0.4mm nozzle. They seem to be very durable. I have been using them for 5 months without any signs of wear.

The pegs need supports to print. I included also a model with built-in supports. Just use small wire cutters to remove them after printing.

There is a slot for the original anti-skid pad.


Logitech K860 4 deg replacement feet

k860_feet_4deg.stl

#Gridfinity compatible AAA battery holder, holds 6 batteries
Half-height, stackable when empty. Places for 6x2mm magnets in the bottom, but no screw holes.

Printable with FDM, tested with 0.4mm nozzle, should work fine also with a 0.6mm.


Gridfinity 1x1 6xAAA battery holder.stl

Gridfinity 2x1 USB SD SD-Micro Combo.stl
#Gridfinity compatible AAA battery holder, holds 6 batteries
Half-height, stackable when empty. Places for 6x2mm magnets in the bottom, but no screw holes.

Printable with FDM, tested with 0.4mm nozzle, should work fine also with a 0.6mm.


#Gridfinity compatible combined USB memory and SD/SD-Micro -card storage.
Stores 7 USB memories/dongles or SD-Cards, or 2..3 Micro-SD -cards in space of each one USB/SD slot.

Half-height, stackable when empty. Places for 6x2mm magnets in the bottom, and 3mm screw holes.

Printable with FDM, 0.4 or 0.6mm nozzle size.

Gridfinity 2x1 USB SD SD-Micro Combo.stl

#Gridfinity compatible combined USB memory and SD/SD-Micro -card storage.
Stores 7 USD or SD-Card, or 2..3 Micro-SD -cards in space of USD/SD slot.

Half-height, stackable when empty.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

tjvirtan

Logitech K860 4 deg replacement feet

Gridfinity 1x1 6xAAA battery holder.stl

Gridfinity 2x1 USB SD SD-Micro Combo.stl