An IKEA SKÅDIS / UPPSPEL pegboard hook for storing the Dbrand Joy-Lock. No screws, no drilling — clips straight onto a standard pegboard.

What's in the pack

1 × STL file 1 × 3MF with my Bambu Lab profile baked in (PLA, 0.2 mm, minimal supports)

Print notes

Print back-face down on the bed 25% infill recommended — load-bearing 4 perimeters give the pegboard hooks enough flex to clip on and off without snapping PETG is a worthwhile upgrade if the mount will hold the controller in direct sunlight

Hardware you'll need

Nothing — clips on directly to the SKÅDIS / UPPSPEL pegboard

Compatibility

Dbrand Joy-Lock with Joy-Cons attached IKEA SKÅDIS pegboard IKEA UPPSPEL pegboard For direct wall mounting (no pegboard) use my T4 Wall Mount listing

License

CC BY-NC-ND 4.0 — personal-use printing only, no commercial reselling of prints, no STL redistribution or modification. Credit MuchaLabs in any posts.

Pairs with my other SKÅDIS-compatible Switch 2 mounts. Tested on Bambu Lab P1S, X1C, and Prusa MK4.

🧡 Designed and printed by MuchaLabs 📩 Have a custom request? Just drop a message!

Don't have a 3D printer? Order printed and shipped from Etsy: muchalabs.etsy.com