An angled desk stand designed to hold the Dbrand Joy-Lock with the Joy-Cons attached, sitting it next to your Switch 2 dock as a centrepiece for your setup. Slim base, clean angle, designed to coordinate visually with the Switch 2 dock rather than fight it. What's in the pack

1 × STL file (single-part stand) 1 × 3MF with my Bambu Lab profile baked in (PLA, 0.2 mm, organic supports)

Print notes

Print base-down on the bed Organic / tree supports under the cradle's upper overhang — easy peel-off 0.16 mm layer height gives a noticeably nicer front face if you have the time Looks excellent in silk PLA, matte black, or anything that picks up the desk's lighting

Compatibility

Designed for the Dbrand Joy-Lock Holds the Joy-Lock with Joy-Cons attached Sized to fit alongside a standard Switch 2 dock without crowding it

License CC BY-NC-ND 4.0 — personal-use printing only, no commercial reselling of prints, no STL redistribution or modification. Tag @muchalabs if you post your finished setup. Tested on Bambu Lab P1S and H2D.

🧡 Designed and printed by MuchaLabs 📩 Have a custom request? Just drop a message!

Don't have a 3D printer? Order printed and shipped from Etsy: muchalabs.etsy.com