Riding while holding a bottle of water can be frustrating, so I designed this bottle holder specifically for the Navee GT3 series (compatible with the GT3 Pro and GT3 Max). This is my first upload, and I hope it helps anyone who has had the same experience. There aren’t many 3D‑printed accessories available for Navee scooters, so I’m happy to contribute something useful to the community.

I recommend printing this in ABS, ASA, or PETG — mine is printed in PETG.

You will need:

• 3 × cable ties (3.6 × 150 mm)
• Glue — I used 5‑minute epoxy (CA glue may not hold well)
• Hair elastic / rubber band

Assembly Steps:

• Glue Dowel inplace with epoxy to the Bottle Bottom.
• Glue Upright to Bottle Bottom
• Slide Bottle claw in place (This is adjustable) - so it must be moveable
• Glue Bracket A to Uprtight.
• Unscrew the lower screw from your OEM Hook
• Place the bottle holder over the exsisting screw hole and rescrew the hook screw in place.
• Take Barcket B and aliagn to fit with Barcket A (can only go one way)
• Use the Cable ties and clamp Bracket A to Bracket B
• Use the Last Cable tie so add support for the Upright Stem and Bracket A.
• Take rubberband/hair elastic and place over the hooks.

Enjoy!

Should you want to make adjustment see Onshape Link. https://cad.onshape.com/documents/247f0d8edce079f140e746d6/w/ab8eaff1bbca931c40bc9ae2/e/7eea174ccdee3cc476f06eef