Canvas mesh with 3 holes per cm, 7 holes per inch
1.2mm line thickness (print with 0.6 line width)

Canvas mesh 3 holes per cm, 7 holes per inch

Ford Focus Dashboard display backlight LED strip holder. 

Ford Display Backlight - LED Strip holder

FordBacklight_v2c.stl

RubberCap.stl

Wall mount for the LED Remote with candelabra cutout. Use a contrasting filament color for the best effect (ex. black for a white remote) Attach to the wall using Blu Tack (recomended) or double sided tape

LEDRemote Candelabra support

panasonic 900.700.750.950.655.550.80.40.303. TR333.TR265.D190WD audio recorder cassette deck player gear

Gear for KENWOOD KX-W79

A remix for faster printing (under 1-2 hours depending on your settings) and less material. (Use .25 Layer height + adaptive layer height, 0.6 line width for extra strength.
Adapter for thinner pipes included 27mm to 22mm (use double sided tape or glue to attach)
If printing with PLA and your heater is above 50C the grip will loosen in time. You can use a plastic zip tie to tighten its grip on the pipe.
Remixed from  https://www.thingiverse.com/thing:4684285

Toilet Paper holder for bathroom heater

TPHeaterSupport.stl

Wine / champagne bottle cap. Print in TPU for a nice fit.

BottleCap.stl

The plastic shoe stand was missing one of it's plastic caps.

ShoeStandCap.stl

Hydraulic brake bleeding funnel for NUTT hydraulic brakes.
You can use a clipped tooth pick as a flow stopper. 
Print without support with the wide part on the base.
Warning: Do not over tighten or apply excessive force then mounting as the threaded part is fragile.

BrakeBleedKitNUTT2.stl

Hydraulic brake bleeding funnel for NUTT hydraulic brakes.
Print without support with the wide part on the base.

Attach a Parkside X20V battery to your bike or scooter. You can use it to power extra lights or accesories.

Secures to this adapter or any standard bottle adapter with a 64mm distance between the screws: https://www.decathlon.fr/p/adaptateur-pour-porte-bidon-sur-cintre-velo-potence-ou-tige-de-selle/_/R-p-119989

Remixed from: https://www.thingiverse.com/thing:4748987

Parkside X20V battery holder for bike bottle adapter

Attach a Parkside X20V battery to your bike or scooter. You can use it to power extra lights or accesories.

Secures to this adapter or any standard bottle adapter with a 64mm distance between the screws: https://www.decathlon.fr/p/adaptateur-pour-porte-bidon-sur-cintre-velo-potence-ou-tige-de-selle/_/R-p-119989


Parkside X20V Battery Holder for bike bottle adapter

Clamp for turn signal vest remote. Glue the flat part to the remote to replace the broken clamp.
Print vertically without support, use brim for extra adhesion.

Turn Signal Remote Clamp

Clamp for turn signal vest remote.
Print vertically without support, use brim for extra adhesion.

TurnSignalRemoteClamp

This masks some of the light going up from the LED projectors on my scooter.  Using them would reduce the chance to blind incoming drivers. First version attaches with a thin double sided tape and black tape ;)

EyeLid for Angel Eye LED projector

Low profile valve adapter (~1.5 cm height). Can be used to inflate scooter tires with difficult to access valves (ex. behind brake disks). Use an O-ring to seal the adapter to the valve or improvise one using a piece of rubber band.
The pump side of the adapter is designed to screw on the Xiaomi Mi Portable Electric Air Compressor (Tire Inflator)


low profile 90 degrees tire valve adapter

90 degrees tire valve adapter

(Beta) Adapter for inflating a scooter tire trough a hole in the brake disk.

slim valve adapter.stl

Custom replacement gear for tape deck player

Tape Deck Gear

DCBoosterCase

Replaces Broken Trigger / throttle on on popular scooters. 
Use strong double sided tape to secure the broken trigger to the holder. (apply the tape on flat surfaces and inside the ring)

Trigger Throttle Holder

Replaces Broken Trigger / throttle on on popular scooters. 

Trigger Holder

Canon Mode Dial cap. Probably only printable with resin printers due to the small features of the text

CanonCap1.stl

Roller for audio player. Print in flexible material like TPU. 10.5 x 6.5 mm (7.3mm with bumps) with 2 mm pin hole.

AudioPlayerRollerTPU-6.5mm bump.stl

Roller for magnetophone. Print in flexible material like TPU. 10.5 x 6.5 mm (7.3mm with bumps) with 2 mm pin hole.

MagnetophoneRollerTPU-6.5mm bump.stl

Elastic band strap. Print using TPU at 0.15 Layer height to mantain elasticity. 

Bike Handlebar Elastic Strap

Bike handlebar mirror support.
Print with support and brim.

Handlebar Mirror Support

mirrorsupport2.stl

USB DC-DC adjustable power supply case 
https://www.optimusdigital.ro/en/adjustable-step-up-power-supplies/7339-dc-dc-boost-module-with-usb-input-display-and-adjustable-voltage.html

Licensed under the Creative Commons - Attribution - Non-Commercial license.

USB DC-DC adjustable power supply case

USBDCBoosterCaseVented2.stl

A webcam stand that attaches to the spool holder on the Anycubic Mega S.

#thangs100k

Anycubic Mega S webcam stand

Use a stem / handlebar water bottle adapter like this one:
https://www.decathlon.co.uk/p/bottle-cage-handlebar-stem-or-seat-post-adaptor/_/R-p-119989 to attach an accesories bar / pipe to your bike or scooter stem. You can then use it to attach extra lights, horns or other accesories.

Use zip ties or hose clamps to secure the bar in the adapter.
Bar diameter is 21mm

#thangs100k

Bike / scooter bottle holder pipe / Accessories bar adapter

Use a stem / handlebar water bottle adapter like this one:
https://www.decathlon.co.uk/bottle-cage-handlebar-adaptor-id_8385631.html
to attach an accesories bar / pipe to your bike or scooter stem. You can then use it to attach extra lights, horns or other accesories.

Use zip ties or hose clamps to secure the bar in the adapter.
Bar diameter is 21mm

#thangs100k

Anti slip pad for metal bowls.
Protects the floor from scratches and water.
Prevents unwanted bowl movement (ex. when Robot Vacuuming) 

#thangs100k

Pet bowl pad

You can experiment with different tips.
#thangs100k

Spinning Top

Push / Thumb Throttle to Twist Throttle converter for e-scooters.

Tested on Honghao S12 with stock handlebar grips. It may work on other brands with similar design. (ex. KUGOO G-BOOSTER)
The interior diameter is 32mm for a tight fit between the margin of the handlebar grip and the slight middle bulge.
You can scale it using your slicing software to adapt to different requirements.

You can still use the throttle with your thumb while the converter is installed.

!!! Warning & Bonus functionality:

You must check the clearance between the converter and push throttle when not engaged. The push throttle must be able to return to the zero position. If any elements (ex. brake bracket, etc.) interfere with the throttle operation you may have to adjust their position slightly.

If you are worried that prolonged usage might damage your throttle lever you may use a small rubber band to wrap around the contact area on the lever or the converter.

When using the adapter the throttle may remain in the engaged position until you return it to the initial position.
You can use this as a form of cruise control on your own risk.
You take full responsibility for using this adapter.

#thangs100k

Push2Twist Throttle Converter

Push2Twist Throtle Converter

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

AirLink

Achievements

Voyager

Novice Maker

Debutant

Sapling