Canvas mesh 3 holes per cm, 7 holes per inch

Canvas mesh with 3 holes per cm, 7 holes per inch
1.2mm line thickness (print with 0.6 line width)

Ford Display Backlight - LED Strip holder

Ford Focus Dashboard display backlight LED strip holder. 

FordBacklight_v2c.stl

RubberCap.stl

LEDRemote Candelabra support

Wall mount for the LED Remote with candelabra cutout. Use a contrasting filament color for the best effect (ex. black for a white remote) Attach to the wall using Blu Tack (recomended) or double sided tape

Gear for KENWOOD KX-W79

panasonic 900.700.750.950.655.550.80.40.303. TR333.TR265.D190WD audio recorder cassette deck player gear

Toilet Paper holder for bathroom heater

TPHeaterSupport.stl

BottleCap.stl

Wine / champagne bottle cap. Print in TPU for a nice fit.

ShoeStandCap.stl

The plastic shoe stand was missing one of it's plastic caps.

BrakeBleedKitNUTT2.stl

Hydraulic brake bleeding funnel for NUTT hydraulic brakes.
Print without support with the wide part on the base.

Parkside X20V battery holder for bike bottle adapter

Attach a Parkside X20V battery to your bike or scooter. You can use it to power extra lights or accesories.

Secures to this adapter or any standard bottle adapter with a 64mm distance between the screws: https://www.decathlon.fr/p/adaptateur-pour-porte-bidon-sur-cintre-velo-potence-ou-tige-de-selle/_/R-p-119989


Parkside X20V Battery Holder for bike bottle adapter

Turn Signal Remote Clamp

Clamp for turn signal vest remote.
Print vertically without support, use brim for extra adhesion.

TurnSignalRemoteClamp

EyeLid for Angel Eye LED projector

This masks some of the light going up from the LED projectors on my scooter.  Using them would reduce the chance to blind incoming drivers. First version attaches with a thin double sided tape and black tape ;)

low profile 90 degrees tire valve adapter

Low profile valve adapter (~1.5 cm height). Can be used to inflate scooter tires with difficult to access valves (ex. behind brake disks). Use an O-ring to seal the adapter to the valve or improvise one using a piece of rubber band.
The pump side of the adapter is designed to screw on the Xiaomi Mi Portable Electric Air Compressor (Tire Inflator)


90 degrees tire valve adapter

slim valve adapter.stl

(Beta) Adapter for inflating a scooter tire trough a hole in the brake disk.

Tape Deck Gear

Custom replacement gear for tape deck player

DCBoosterCase

Trigger Throttle Holder

Replaces Broken Trigger / throttle on on popular scooters. 

Trigger Holder

CanonCap1.stl

Canon Mode Dial cap. Probably only printable with resin printers due to the small features of the text

AudioPlayerRollerTPU-6.5mm bump.stl

Roller for magnetophone. Print in flexible material like TPU. 10.5 x 6.5 mm (7.3mm with bumps) with 2 mm pin hole.

MagnetophoneRollerTPU-6.5mm bump.stl

Bike Handlebar Elastic Strap

Elastic band strap. Print using TPU at 0.15 Layer height to mantain elasticity. 

Handlebar Mirror Support

Bike handlebar mirror support.
Print with support and brim.

mirrorsupport2.stl

USB DC-DC adjustable power supply case

USB DC-DC adjustable power supply case 
https://www.optimusdigital.ro/en/adjustable-step-up-power-supplies/7339-dc-dc-boost-module-with-usb-input-display-and-adjustable-voltage.html

Licensed under the Creative Commons - Attribution - Non-Commercial license.

USBDCBoosterCaseVented2.stl

Anycubic Mega S webcam stand

A webcam stand that attaches to the spool holder on the Anycubic Mega S.

#thangs100k

Bike / scooter bottle holder pipe / Accessories bar adapter

Use a stem / handlebar water bottle adapter like this one:
https://www.decathlon.co.uk/bottle-cage-handlebar-adaptor-id_8385631.html
to attach an accesories bar / pipe to your bike or scooter stem. You can then use it to attach extra lights, horns or other accesories.

Use zip ties or hose clamps to secure the bar in the adapter.
Bar diameter is 21mm

#thangs100k

Pet bowl pad

Anti slip pad for metal bowls.
Protects the floor from scratches and water.
Prevents unwanted bowl movement (ex. when Robot Vacuuming) 

#thangs100k

Spinning Top

You can experiment with different tips.
#thangs100k

Push2Twist Throttle Converter

Push / Thumb Throttle to Twist Throttle converter for e-scooters.

Tested on Honghao S12 with stock handlebar grips. It may work on other brands with similar design. (ex. KUGOO G-BOOSTER)
The interior diameter is 32mm for a tight fit between the margin of the handlebar grip and the slight middle bulge.
You can scale it using your slicing software to adapt to different requirements.

You can still use the throttle with your thumb while the converter is installed.

!!! Warning & Bonus functionality:

You must check the clearance between the converter and push throttle when not engaged. The push throttle must be able to return to the zero position. If any elements (ex. brake bracket, etc.) interfere with the throttle operation you may have to adjust their position slightly.

If you are worried that prolonged usage might damage your throttle lever you may use a small rubber band to wrap around the contact area on the lever or the converter.

When using the adapter the throttle may remain in the engaged position until you return it to the initial position.
You can use this as a form of cruise control on your own risk.
You take full responsibility for using this adapter.

#thangs100k

Push2Twist Throtle Converter

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

AirLink

Achievements

Voyager

Novice Maker

Debutant

Sapling