SAKURA | Scalable Pencil Holder

Inspired by spring cherry blossoms, SAKURA brings a soft, floral touch to your desk.

100% scalable, print it at any size you need

Go jumbo-size go to tame your chaotic desk jungle, or tiny and adorable for little hands (and even tinier pencils).

My kids love them so much I had to print extra-tiny ones on top of all 3 original prints that they already snatched away ;-D

DIMENSIONS | Ø 120mm x H 90 mm but scalable!

3D PRINT SETTINGS: The STL file is already oriented properly. The model is "full", that's totally normal. You have to "emtpy it" by using one of the methods described below:

I recommend to print it in vase mode (see settings below):

For a 0.8mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.4mm/layer • Line width: 0.8 to 1.5mm (it works ;-) • Bottom shell layers: 3

For a 0.4mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.2mm/layer • Line width: 0.8 to 1mm • Bottom shell layers: 6

Or you can print in regular mode (not vase mode) with a 0.4mm nozzle and 2 to 4 wall perimeters. Just make sure to cancel the infill and cancel top layers so you actually end up with a cup.

I also added some fuzzy skin to add some surface texture: • fuzzy skin point distance: 0.6mm • fuzzy skin thickness: 0.25mm.

Happy printing!