Select a membership plan

Model is included in this plan
Available now

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Model is included in this plan
Available now

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

or
Thangs Bundle

Want this model? Get it instantly with Thangs Bundle plus thousands of other premium designs from 250+ top creators.

Charles R
CharlesRegaud2.9K followers
Follow
CharlesRegaud
CharlesRegaud
|
Image 1 of 8
SAKURA | Scalable Pencil Holder 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 8
SAKURA | Scalable Pencil Holder 3d model
SAKURA | Scalable Pencil Holder 3d model
SAKURA | Scalable Pencil Holder 3d model
SAKURA | Scalable Pencil Holder 3d model
SAKURA | Scalable Pencil Holder 3d model
SAKURA | Scalable Pencil Holder 3d model
SAKURA | Scalable Pencil Holder 3d model
SAKURA | Scalable Pencil Holder 3d model
SAKURA | Scalable Pencil Holder 3d model

SAKURA | Scalable Pencil Holder

Subscribe for access starting at $10 USD
Get access to this model and 105+ more

SAKURA | Scalable Pencil Holder

Inspired by spring cherry blossoms, SAKURA brings a soft, floral touch to your desk.

100% scalable, print it at any size you need

Go jumbo-size go to tame your chaotic desk jungle, or tiny and adorable for little hands (and even tinier pencils).

My kids love them so much I had to print extra-tiny ones on top of all 3 original prints that they already snatched away ;-D

DIMENSIONS | Ø 120mm x H 90 mm but scalable!

3D PRINT SETTINGS: The STL file is already oriented properly. The model is "full", that's totally normal. You have to "emtpy it" by using one of the methods described below:

I recommend to print it in vase mode (see settings below):

For a 0.8mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.4mm/layer • Line width: 0.8 to 1.5mm (it works ;-) • Bottom shell layers: 3

For a 0.4mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.2mm/layer • Line width: 0.8 to 1mm • Bottom shell layers: 6

Or you can print in regular mode (not vase mode) with a 0.4mm nozzle and 2 to 4 wall perimeters. Just make sure to cancel the infill and cancel top layers so you actually end up with a cup.

I also added some fuzzy skin to add some surface texture: • fuzzy skin point distance: 0.6mm • fuzzy skin thickness: 0.25mm.

Happy printing!


Discussions

SAKURA | Scalable Pencil Holder

10 downloads · 4 months ago in  and 
Charles R
CharlesRegaud2.9K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 105+ more