An adapter designed to mount Bambu Lab X/P series hotends (or compatible high-flow hotends like TZ 2.0 / TZ 3.0) onto the stock toolhead of the Creality Ender 3 Neo series (Neo, V2 Neo, Max Neo). This upgrade allows you to utilize more efficient, high-flow hotends on your existing machine.

https://photos.app.goo.gl/n7nPeEASBriengTd7

Key Features:

• Stock-Style Mounting: The adapter uses the original mounting points of the stock Ender 3 Neo hotend. No modifications to the carriage are required for installation.
• Safe Material Choice: Due to the efficient heatbreak design of Bambu-style hotends, heat is well-contained in the heater block. This allows the adapter to be safely printed in PLA, as the mount itself remains cool during operation.
• Standard Fitting: The design is made to accept a standard PC4-M6 pneumatic fitting (bowden coupler) to secure the PTFE guide tube.

Hardware:

• M3 Screws & Nuts: Used to secure the adapter to the carriage.
• PC4-M6 Fitting: For securing the PTFE tube.

Firmware Recommendations:

• Heater: You can change the heater power to 45w for faster heating.
• Thermistor: You do not need to change the thermistor type in your firmware. The thermistors supplied with Bambu-style hotends (typically NTC 104NT) are compatible with the stock Ender 3 Neo configuration and will report accurate temperatures out of the box.
• Calibration: PID Tuning is MANDATORY after installation. Because the thermal parameters of the hotend has changed, you must run a PID tune to ensure stable temperature control.