Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5430063.

This is a complete redesign of thing 4170231.

This is a complete fan duct for the Ender 3 style series of printers. Extremely compact and efficient and guaranteed to outperform any other single 5015 style fan duct. This is setup specifically to work with the Dragonfly BMS, and stock Ender 3 series hotends.

Final design is 60mm wide without BLTouch, and 80mm with.

Flow simulations and data aside, what I am most proud of with this design, other than its excellent airflow and cooling, is that it is specifically designed not to alter default offsets from the stock fan shroud, at all. 

Extensive testing also proved that printing a 15 minute Benchy suffered no lack of cooling!

Supports: Touching BuildPlate
Designed for 30% infill but use whatever youd like.


Grey Squirrel Compact Toolhead

40mm_VelocityStack2.stl

Grey_Squirrel-5015Stack.stl

Grey_Squirrel_bltouch_mount.stl

Grey_Squirrel_Clamp.stl

GSDetachable-RS-Grey_Squirrel_Duct.stl

GSDetachable-RS-Grey_Squirrel_Duct_001.stl

Fan duct that flips the fan around so the mounting bracket doesnt choke the intake of the fan

Fan Duct For BondTech DDX with Ender 3 V2

Fan Duct For BondTech with Ender 3 V2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5156424.

phone holder for a desk!

desk phone holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5141666.

simple rifle scope cap for a 38mm diameter scope.

Rifle scope cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5034533.

Print on its side with supports touching buildplate and infill 20%

Ender 3 C922 Webcam Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5141664.

I made this to hold a digital caliper box and some other tools, it hangs on the metal bar of my desk, said bar is 19mm in diameter.

Desk tool caddy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5027402.

This is a Magwell for the H&K P30L.

It requires default quality settings

Infill: 20%

No supports

Union Overlapping Volumes: Off

Keep Disconnected Faces: On 

H&K P30L Magwell

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5206285.

Micro Engraver pen attachment for Ender 3 with BL Touch Adapter!!!

Engraver attachment mounts where BL Touch bracket normally goes.

Dont forget to adjust your Z offset and youll have to adjust xy offsets too if you want accuracy when placing a design in slicer to end up where you want it on the build plate.

I use G28 auto home only with this attachment and dont use G29 mesh bed leveling as you have to level with the height of the object your engraving and one point of probe contact is easier than chasing the probe during mesh bed leveling with the object youre trying to engrave.



Generally close Offsets are X -42 and Y -33
Z is dependent on the position of the engraver in the holder

Engraver Holder for Ender 3 (Endgraver V1.0)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5033437.

Webcam mount for Ender 3 for the Logitech C922, any 1/4 inch thumbscrew will secure it to the camera.

Print on its side with supports touching buildplate.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5151786.

This is a simple adjustable phone stand I made in Blender. Will also hold a tablet or similar sized device. Enjoy!

Adjustable Phone Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5359984.

Many people have commented on the original design remarking that it is too slow. I made the intake a fair bit larger which should help quite a bit.

Ender 3 Hotend Fan Silencer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5027399.

This is a magazine extension for the H&K P30L that adds an additional 5 rounds with no aftermarket spring kit required.

Infill 20%

Standard Quality

No support material required

Enjoy!

HK P30L Magazine Extension

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5353428.

This is a simple filament filter that doubles as a guide for the Ender 3 and clips into the aluminum extrusion near the spool holder.

Ender 3 Filament Filter IMPROVED

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5359816.

The original didnt quite fit the Sunon 5015 24v. Now it does!

5015 to 4010 blower adapter for Ender 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5353843.

Laser Mount for the Ender 3 that makes it so you can keep your Laser and BLTouch mounted and print as you normally would using the stock hotend shroud.

Ender 3 Laser Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5152846.

Just improved the previous design where the tolerances were too tight and made the holes all the way through for the filament "rivets".

Hat Rack Infinite

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5156415.

cover the light on your bl touch!

bl blocker

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5150669.

Just a simple click-into-place LCD cover I made for my Ender 3. Works great, no scaling or anything needed. Just print vertically with a brim and youre good!

Ender 3 LCD Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5138380.

holds two batteries!

made it for my digital caliper case.

complete redesign of another model here on thingiverse

lr44 holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5141662.

if using cura, turn off union overlapping volumes, turn on extensive stitching and print as surface=both

Maglite Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5042029.

Prints with default settings in Cura

youll want to glue a small washer inside the middle of the pulley to prevent it from sliding on the pin, or modify the model of the pulley to have an extruded notch in the center. (if you wish).

Filament Guide for Ender 3 with logo and roller

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5141663.

fits a standard size smoke detector and attaches to aluminum extrusions with t nuts

smoke detector holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

cspires1993

Grey Squirrel Compact Toolhead

Fan Duct For BondTech DDX with Ender 3 V2

desk phone holder

Rifle scope cap

Ender 3 C922 Webcam Mount

Desk tool caddy

H&K P30L Magwell

Engraver Holder for Ender 3 (Endgraver V1.0)

Ender 3 C922 Webcam Mount

Adjustable Phone Stand

Ender 3 Hotend Fan Silencer

HK P30L Magazine Extension

Ender 3 Filament Filter IMPROVED

5015 to 4010 blower adapter for Ender 3

Ender 3 Laser Mount

Hat Rack Infinite

bl blocker

Ender 3 LCD Cover

lr44 holder

Maglite Holder

Filament Guide for Ender 3 with logo and roller

smoke detector holder