Marco S
Mythmarco187 followers
Follow
Mythmarco
Mythmarco
|
Image 1 of 14
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Mythmarco
Mythmarco
|
Image 1 of 14
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 video thumbnail
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model
Light Bearer System – LED Diffuser Remix for Underware 2.0 3d model

Light Bearer System – LED Diffuser Remix for Underware 2.0

💡 Light Bearer System – LED Diffuser Remix for Underware 2.0

Transform your workspace into a luminous, modular masterpiece with the Light Bearer System — a remix of HandsOnKathy’s Underware 2.0 that turns cable rails into LED-lit visual highlights.

This system repurposes the top faceplates of the cable management setup into functional light diffusers, designed for COB LED strips. The faceplates feature a glowing hexagonal pattern achieved through a two-color filament swap. Fully compatible with Multiboard.


⚙️ System Components

The Light Bearer System includes:

  • 1x1, 1x3, 1x5, 1x7, 1x9 faceplate & channel sets
  • C-small and C-large curved faceplate & channel sets
  • Diagonal faceplate & channel
  • L-channel (corner) faceplate & channel
  • Threaded Snap Connectors (compatible with Underware 2.0)

💡 All channels include baseplate holes for direct mounting onto drywall using self-tapping or anchor screws — Multiboard is optional.


🧱 How to Print the Light Diffuser

To achieve the glowing hex-grid effect:

  1. Print the first 2 layers in white filament
  2. Change filament to black (or contrasting base color) for the rest
  3. Print channels and connectors in black PLA
    • (Optional: Use red or another accent color for connectors)
  4. Insert COB LED strip into the channel
  5. Snap the faceplate into place

🔧 Recommended Tools & Materials

These are affiliate links – if you purchase through them, I may earn a small commission at no extra cost to you. Thanks for supporting my work!

🧵 Filament Recommendations 🔋 COB LED Strip & Accessories

This remix stays true to the modularity of Underware 2.0, but adds a whole new dimension — light. Whether you're framing a workspace, backlighting a logo, or adding ambient glow, the Light Bearer System is a powerful and flexible solution.


🧩 Based On:

HandsOnKathy’s Underware 2.0 Cable Management System


Discussions

Light Bearer System – LED Diffuser Remix for Underware 2.0

91 downloads · 10 months ago in  and 
Marco S
Mythmarco187 followers
Follow