Show your team pride the moment the lights go on! This layered light-box captures the iconic Cowboys star set against a subtle wave pattern. Two rear key-holes make wall-mounting easy, and a side slot routes the USB lead for your LED strip (LEDs are on the way, but I couldn’t keep the file from you any longer).

Print profiles • 2 HD native – scale to 92 % for Bambu X1C / P1P-S, Neptune 3/4, etc.; settings stay the same. • Front panel: 0.20 mm layers (first layer 0.16 mm for a flawless face) • Back panel: 0.24 mm layers for speed

Walls 2 x 0.4mm Infill 10% Grid Seam Rear (Aligned)

Calibration first! Run Flow-Dynamics & Flow-Rate on every colour—the first layer is your display surface.

Assembly & lighting Press-fit or CA-glue the coloured face to the charcoal backing. Feed a 5 V USB LED strip through the slot and tape it around the inner lip. Hang via the built-in key-holes, plug in, and let the star shine

Hardware & consumables I use (Affiliate links—using them won’t change your price but helps me keep designing, thank you!)

5V COB LED Strip Narrow 5mm → https://amzn.to/43doVHo Type-C Female Chassis Waterproof 2P→ https://amzn.to/4kqLLRw Soldering Kit → https://amzn.to/3IAeG83 3 M double-sided foam tape for securing LEDs → https://amzn.to/43eSrfT Super Glue Clear, Strong Adhesive→ https://amzn.to/4kfVXwC Polymaker PLA PRO → https://amzn.to/4dy5Ymd Elegoo PLA → https://amzn.to/45nqmUY ANYCUBIC PLA Plus → https://amzn.to/4kzy8zs