The 2025 Formula 1 season is here! So now you can have an AWESOME way to decorate your workspace! You can use it to raise your monitors up from your desk, a laptop stand, or just as an expandable desk organizer.

This monitor stand / desk organizer is modeled to look similar to the real F1 pits at Monza in Italy.

While it looks cool, it does also have some cool functionality built into it.

– FEATURES >>> INFINITELY EXPANDABLE <<< Each side of the pit has channels to either hold a side panel, OR to use an expander pin to connect it to ANOTHER F1 Pit organizer! You wanna have 10 of them all hooked together going all the way down your wall? DO IT.

**>>> Storage <<<**

The windowed area slides out as a drawer to hold pens, small notebooks, anything you want! The bottom is purely for storage, but has a small cut-out in the back to allow for charging cables for your devices. (Fits bambu refill boxes perfectly)

**>>> Customization <<<**

Includes several drawer handles; "FORMULA 3D" & a blank one.

The blank one is included so you can design your own handle if you like.

Both AMS & Non-AMS Versions available, so you can print it on practically everything (Except A1 mini)

– ASSEMBLY Assembly is pretty easy, Only possibly using a little bit of superglue, depending on how the tolerances on your final print come out. - Top & Bottom - When you go to assemble the top and bottom, you'll notice the fins on the Pit top and the channels in the Pit bottom. Simply slide those together and voila!

(For the best and most secure hold, I might recommend a dab of super glue on each side of each fin before inserting the top section into the bottom.)

**- Drawer -** (Use glue if needed)

To assemble the drawer, first you'll want to insert the (6) handle fins into the slots on the underside of the drawer. Attach the handle onto the fins you just placed on the underside of the drawer. Insert the drawer clips into the inner channels on either side of the rear of the drawer. This space is intentionally low tolerance, as the clips don't need to come out. Glue the 4 windows to the front of the drawer, bed side facing out.

The 2 windows in the middle are smaller than the 2 outer windows, so make sure to match them to the spaces before gluing.

**- Final Assembly -**

Insert drawer into pit base, while holding down drawer clips. Once inserted, the clips will extend, preventing the drawer from falling out.

To release drawer, extend fully, and use a small flat object to depress the clips on the sides of the drawer.

**Thanks for checking out my design, I hope you enjoy it! Please don't forget to like, download, and follow! Stay tuned for even more awesome designs from PRINT3D DESIGNS **