Newair AI-100SS Drain Cap and Plug
7 downloads · 2 years ago · Print cap with 0.12 layer height in PLA+ or better. Print plug with TPU. The plug is very small and
Print cap with 0.12 layer height in PLA+ or better. Print plug with TPU. The plug is very small and TPU prints very hot, so slow it down to 5-10mm/s to prevent it from melting while printing. It's still only a 5 minute print even at those speeds.
Newair AI-100SS Drain Cap and Plug
7 downloads · 2 years ago in and
Drain Plug for Raypak Pool Heater Return Header
FeelFree drain plug v1.stl
Chest Freezer Drain Plug
Drain plug for wash tub (threaded)
Drain Plug RZR
4in PVC Drain Pipe Pot Plug
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE
Lightbulb Moment
drain cover and strainer
Toilet Shot Glass
3D Print: One Can Cooler
Utility Sink Faucet Plugs
Small Bathtub with bathbomb cup
Baby Bath Drain Plug.stl
Toilet For Modular Desktop Fountain
Chinese Puzzle Ball (Plain)
Shaving accessories stand for philips oneblade
