Customizable 3D printable springs for bobbleheads and similar designs.
Parameters
- Coil Count - Sets how many coils the spring has. More coils will result in a more flexible spring.
- Weight - Sets how heavy the spring “wire” is. For best results, set this value to a multiple of your nozzle diameter.
- Thickness - Sets the overall thickness of the spring. A thicker spring will be less free to bend horizontally.
- Width - Sets how wide the spring coils are. A wider spring will be less free to bend forward and backward.
- Top Width - Adds an optional extended top to the spring.
- Top Height - Sets the height of the optional top of the spring. Use this to make the spring taller without adding coils.
- Bottom Width - Adds an optional extended bottom to the spring.
- Bottom Height - Sets the height of the optional bottom of the spring. Use this to make the spring taller without adding coils.
- Peg Width - Sets how wide (and tall) the attachment peg on the spring is.
- Peg Length - Sets how long the attachment peg on the spring is.
Printing
- Set perimeter count high enough for spring arms to be filled with perimeter lines
- Some configurations will require supports - most commonly when the peg height is less that the overall spring thickness.
Update You can now create a customized spring insert tool. This will only work if only one end of the spring has a wide ledge.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.