Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3973236.

Requested by [OddModsNL](https://www.thingiverse.com/OddModsNL/about), I followed the same process I did for curling [the other flexible lizard](https://www.thingiverse.com/thing:3699162). This allows for a more efficient use of space, so the lizard can be upscaled.

Make sure your bed adhesion is right when megasizing your prints! I recommend hairspray, tape, or a raft.

**Post Makes!**

Curled Horned Articulated Lizard

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3699162.
It was a remix of McGybeer's lizard, [which he seems to have updated to already be curled](https://thangs.com/McGybeer/Articulated-Lizard-v2-30493). Must have liked the idea.

When trying to print a maximum-sized lizard, there was a lot of wasted space just because the model wasn't compact enough.
The biggest we could make with my printer was about 150%, when aligned diagonally.
***This one I could print at 213%.***

If you're supersizing, make sure you get your bed adhesion right. I'd recommend tape, glue, or hairspray.

Post Makes!

Curled Articulated Lizard

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4549828.

The mechanism for this puppet came to me *during* the Crafsman contest video and I'm really proud of how it turned out!
Check out my entry right here: [AWRIGHT](https://www.youtube.com/watch?v=pis6VDcppsM)!
If you're going to print this, lay it on its back and add a lot of supports, especially to the back of the head (go around the hair and support the eyes!) since the head is a separate piece.

Post Makes!

Crafsman Print-In-Place Puppet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3877238.

A set of two parts: a ring and token that can be interlocked with a garment in between, allowing them to hang on clothing and look awesome. Two types.

My brother printed a couple of circles to test clearance for another project and I stuck them through my shirt. There was a gap tight enough that it stayed and I thought it was a cool effect.
I designed my own and it eventually morphed into a neat ring that reminded me of the famous Stark Reactor (or a Stargate, whichever you prefer).
After a couple of tweaks, I printed the bulkier model and poured resin in the upper half, leaving a gap underneath big enough to still fit the token that allows hanging on a shirt.

Ring has 9 chevrons.
Notice that the token with the debossed circle is larger and has one non-chamfered edge. I used that for a slightly harder line when pouring resin.

**POST MAKES!**

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Wearable Arc Reactor / Stargate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4178287.

I wanted to make something cool for my father-in-law's birthday and he's a fan of the Broncos handegg team, so I put together something for his office.

This took 14 hours to print with my settings, but I think it looks pretty nice.

There are two versions: one with floors in the tubes and one with them fully hollow.

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Broncos Super Bowl Pencil Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3651544.

Check out [version 2.0](https://www.thingiverse.com/thing:4316096)!

This is an accessory that allows a player to suspend the screen above them if they want to lay down and still play.
It includes four "rings" that can be used as anchor points for string.

Slide the rails on first, then connect the bottom pieces in place with the little key.

**Post Makes!**

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Nintendo Switch Console Hanger (v1)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3631340.

After hollowing out Flowalistik's Low-Poly Eevee, I added an opening on the bottom and holes on the top for salt transferrence. Throw a connector cap on there and you've got something useful and cute!

The cap isn't 100% salt-tight, but it does the job; feel free to remix or suggest some changes.

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Low-Poly Eevee Salt Shaker

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4224510.

These shells hold the original tiles together with magnets.
Each shell requires twelve 3mm cubic magnets, for a total of 228 (19 hexes * 12 magnets) to complete the original game set.

If you also want to print the [port shells](https://www.thingiverse.com/thing:4224679), note that an extra 18 magnets will be needed (9 ports * 2).

I can't seem to find 3mm Cubic Magnets on Amazon anymore, so here are some possible other places to look. I'm not endorsing any of these, so make sure to research them:
[Lightinthebox](https://www.lightinthebox.com/en/p/magnet-toys-216-pieces-3mm-magic-cube-executive-toys-puzzle-cube-for-gift_p5750665.html?currency=USD&litb_from=paid_adwords_shopping&country_code=us&utm_source=google_shopping&utm_medium=cpc&adword_mt=&adword_ct=348244861814&adword_kw=&adword_pos=&adword_pl=&adword_net=u&adword_tar=&adw_src_id=2907233386_1900092181_74380517910_pla-837652590152&gclid=CjwKCAiAu8SABhAxEiwAsodSZOuU2JDLvMwEXIL6vW9UYdR-OGaijWRHKf84oNy1tvxdgDcQkfqdChoCqT4QAvD_BwE)
[eBay](https://www.ebay.com/itm/154299226184?mkevt=1&mkcid=28&chn=ps)
[NewEgg Search](https://www.newegg.com/p/pl?d=3mm+cube+magnet)
[NewEgg](https://www.newegg.com/p/0X6-04KT-0V2G2?Description=3mm%20cube%20magnet&cm_re=3mm_cube%20magnet-_-0X6-04KT-0V2G2-_-Product)
[NewEgg](https://www.newegg.com/p/01N-04T7-00005?Item=9SIAMXUBH69052)

---
## !! IMPORTANT !!
Magnets must be glued following a specific pattern!
There are two magnets per side so every tile will connect to every other tile without repulsion.
The very first magnet can be glued in any orientation, but its partner must be glued in opposing polarity; such that a side will attach *when the shell is rotated*.
Subsequent gluings can be accomplished by placing loose magnets on a side of a completed shell, placing glue in the magnet holes, and pressing the shells together.
---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Settlers of Catan Magnetic Hex Shell

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4316096.

I liked having console suspension, but the first design I made and posted was fragile and inefficient, so I started from scratch.
This design is easier to print, has a smaller footprint, and is more durable.

Post Makes!

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Nintendo Switch Console Hanger v2.0

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4224679.

Companion to [Magnetic Hex Shells](https://www.thingiverse.com/thing:4224510).

I can't seem to find 3mm Cubic Magnets on Amazon anymore, so here are some possible other places to look. I'm not endorsing any of these, so make sure to research them:
[Lightinthebox](https://www.lightinthebox.com/en/p/magnet-toys-216-pieces-3mm-magic-cube-executive-toys-puzzle-cube-for-gift_p5750665.html?currency=USD&litb_from=paid_adwords_shopping&country_code=us&utm_source=google_shopping&utm_medium=cpc&adword_mt=&adword_ct=348244861814&adword_kw=&adword_pos=&adword_pl=&adword_net=u&adword_tar=&adw_src_id=2907233386_1900092181_74380517910_pla-837652590152&gclid=CjwKCAiAu8SABhAxEiwAsodSZOuU2JDLvMwEXIL6vW9UYdR-OGaijWRHKf84oNy1tvxdgDcQkfqdChoCqT4QAvD_BwE)
[eBay](https://www.ebay.com/itm/154299226184?mkevt=1&mkcid=28&chn=ps)
[NewEgg Search](https://www.newegg.com/p/pl?d=3mm+cube+magnet)
[NewEgg](https://www.newegg.com/p/0X6-04KT-0V2G2?Description=3mm%20cube%20magnet&cm_re=3mm_cube%20magnet-_-0X6-04KT-0V2G2-_-Product)
[NewEgg](https://www.newegg.com/p/01N-04T7-00005?Item=9SIAMXUBH69052)
---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Settlers of Catan Magnetic Port Shell

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3634639.

This is a 3D-Printable No-Supports music baton made for a friend. 
Included are two models: one clean and one with an example inscription.

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Music Baton - Staff Handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3614696.

This is a simple strip to set inside the [Ender 3](https://www.creality3dofficial.com/products/official-creality-ender-3-3d-printer?sca_ref=574525.Sup1ZkNEjX) frame to keep it clean.

I printed a fan cover because I heard lots of debris would come from printing. This turned out to be true and I noticed the plastic scraps still got into some other crevices, so I designed a part to set inside the holes to keep the area flush.

Similar to https://www.thingiverse.com/thing:3248551
I found that after I designed this. Its name wasn't intuitive for me during searches.

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Creality Ender 3 Rail/Frame/Bar Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4933382.

My wall space is underutilized and I needed a place to put my earbuds.

Designed a shelf in Fusion 360 and attached it to the wall above my bed with Command strips.

Skullcandy Sesh Evo Shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4082491.

A small shelf which provides a grab point on a wall for a ratchet-style belt.
This shelf has a tab on the bottom with a recessed area, providing a latch point for my particular belt. 

---
### History
I like to hang up my belt.
I've gotten along decently, finding places to wedge it into on a shelf or in the wall, but I needed a better solution. Enter 3D Printing.

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Hanging Belt Shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4183060.

I didn't have a metal spring handy, but I was aware of a 3D-printing technique for making one.

The end sheaths should fit around an inner diameter of 10mm.

Print two and glue the sheaths together for a stronger spring!

Created by necessity for [pmkoch's Dwight Schrute bobblehead](https://www.thingiverse.com/thing:3970251).

---
Buy me a drink at https://ko-fi.com/stetofire
or [donate directly](https://www.paypal.me/stetofire)

Spring for Bobblehead

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Stetofire