Gridfinity Nippers + Strippers + Pliers Racks

Nipper Holder x6.stl

Pikachu - Pokemon - Fan Art

Raised Multiboard Snap

Multiboard Snap.stl

9x9 MU - Center Grid Interfitted - MultiBoard Octagon Plate

9x9 Multiboard Core Tile.stl

Mario - Super Mario Bros. - Fan Art

Mario - Super Mario Bros. - Fan Art

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

DS Snaps - Grip Removal Tool

DS Snaps - Grip Removal Tool.stl

8x8 Multiboard Corner Legacy Tile

8x8 Multiboard Corner Tile.stl

Ironing Stack - Test Print - Key Chain

Multiboard Tile Key Chain, Stack Print Test.stl

Collapsing Master Sword (Print-in-place)

MASTER SWORD-PNP.stl

Gridfinity Pick + Tweezer Racks

Illustration! Don't print!!

Gridfinity 3D Printing Bundle for Nerds

3D Printer Caddy.stl

8x8 Multiboard Side Legacy Tile

8x8 Multiboard Side Tile.stl

Gridfinity Pen, Pencil, and Marker Holders

Sharpie Holder, Chisel.stl

Stormchunker - FREE Star Wars Stormtrooper Kit | No Supports, No AMS, No Glue

Plate 4 - Black.stl

Sword-Saber Test Print

This is a test print for the collapsing swords and Light Sabers.  If you can print thing without the rings sticking together then you should be able to successfully print the full sword. 

Rails 1x1 - Cargo Connect

Ready to Print - Rails 1x1.3mf

Lever action Wallet

Top.stl

Gridfinity Caliper Holder

Stash your measuring bois on your Gridfinity modular workshop storage system, Excalibur style.

Gridfinity is the ultimate organizer for your whole workshop! Learn more at  
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file: 
https://a360.co/3KZAXs6

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to [a weighted baseplate](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925?manualModelView=true) using magnets or screws!

**Gridfinity Tips!**
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Snap (DS Part B)

Snap (DS Part B) - Standard.stl

 Voronoi Pencil Holder Cup, Office Desk Organizer 

A 3D printable Voronoi pencil holder.

Keep your pens and pencils in one place with this stylish Voronoi pencil holder.

The Voronoi cell structure gives this holder an elegant look and translucent features. The model is easy-to-print, strong, and stable. It also doesn't need any support material. I recommend tuning your retraction settings and aligning the z-seam before printing.  

- Print time: 4 - 6 hours
- Size: 9 x 9 x 10.6 cm
- Weight: 25 - 50 grams

Happy printing

Nozzle size: 0.4 mm
Layer height: 0.2 - 0.3 mm
Walls: 2 - 3
Infill: 10%
Speed: 35 - 60mm/s

Print this spacer to use ['The Filament' refills](https://shop.spectrumfilaments.com/eng_m_THE-FILAMENT-3588.html?filter_price=&filter_traits%5B868%5D=&filter_traits%5B954%5D=961&filter_traits%5B22%5D=&filter_traits%5B1705%5D=&filter_traits%5B1151%5D=) together with Bambu Lab spools. In this case, the filament uses the same size cardboard core, but this  adaptor ensures a tighter fit so your filament stays correctly wound. It prints in under 2 hours using labout 30 grams of filament.

---

**_Printing Guidelines_**

- 0.2mm layer height
- 2-3 Perimeters
- 5 top and bottom solid layers
- Disable 'Extra Perimeters', 'Ensure vertical shell thickness', 'Fill gaps', and  'Detect narrow internal solid infill' to reduce uneccessary infill.
- Set perimeter generator to 'Arachne'
- 0% infill
- Set 'slice gap closing radius' to 0mm
- Enable 'Arc fitting' 

Prints well with PLA or PETG. 

---

**_Assembly_**

Place the refill onto the half of the Bambu Spool with the alignment notch.

Place this spacer with the wider face against the filament, on the opposite side of the refill. The print has a cutout to make space for the inside end of the refill, which sometimes sticks out.. otherwise you can ignore it.

The second half of the Bambu Spool goes through the spacer and the refill core. Press the halfs firmly together while locking them together to ensure a proper connection. This is an intentionally tight fit to keep the filament from tangling on the spool.


'The Filament' Refill to Bambu Spool Adaptor

The Filament Refill to Bambu Spool Adaptor - 7mm Spacer.stl

Print this adaptor to use [eSun Filament Refills](https://tidd.ly/4qk2xVj) together with Bambu Lab spools. This lightweight but sturdy adaptor ensures a secure fit so your filament doesn't unravel. It prints in under 2 hours using less than 45 grams of filament.

Along with the STL file, I've included 3MF project files for Orca(BambuLabs) and Prusa(Qidi) Slicers with preset settings. Otherwise, you can use the settings below for best results:

---

**_Printing Guidelines_**

- 0.2mm layer height
- 2 Perimeters
- 5 top and bottom solid layers
- Disable 'Extra Perimeters', 'Ensure vertical shell thickness', 'Fill gaps', and  'Detect narrow internal solid infill' to reduce uneccessary infill.
- Set perimeter generator to 'Arachne'
- 0% infill
- Set 'slice gap closing radius' to 0mm
- Enable 'Arc fitting' 

Prints well with PLA or PETG. Using filaments that shrink more, like ABS or ASA may cause a bad fit to the spool.

**Note:** There's a small notch that aligns with one side of the Bambu spool to prevent spinning. Make sure to assemble so they fit together (See last photo).

**Note:** This model is designed for recent eSun refill spools with 55mm height and 92mm inner diameter. Older refill spools may not fit.

---

Photographed model was printed on the [QIDI Q1-Pro 3D Printer](https://qidi3d.com/products/q1-pro-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also on [Amazon](https://amzn.to/4a1BtS9))*

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

eSun Refill to Bambu Spool Adaptor

eSun2Bambu_SpoolAdaptor.stl

🌼 Mario's piggy bank 🪙

Three pipe versions:
- Diameter 80mm, thread six lead-in
- mason wide mouth
- pringles

Hole length 42 mm, any coin will enter 👌
[Use glue for assembly](https://s14.gifyu.com/images/bTwDf.jpg) 💧

 🪙🪙🪙🪙🪙🪙🪙

👉 Check My  [Patreon](https://patreon.com/bigovereasy)  and  [Boosty](https://boosty.to/bigovereasy) 👈
Join my [Telegram!](https://t.me/best_layer) ⭐💬



Piranha Plant Piggy Bank lid

gums.stl

**Eggs for your wall! These cute little photo holders can be used to mount your favorite photos.**

It is a set of 3 different 3d scanned eggs. The parts are numbered so you always know which white belongs to which yellow. The parts are flattened out where the photos go so you don’t end up damaging them.

**Instructions**
- Print all parts
- Insert 10x2 mm magnets, pay attention to the direction. Use glue to hold them in place.
- Mount the things on your wall with either wall mount tape a nail or a screw. There is a keyhole cut-out in the back. 
- Place your favorite photos!


**Print settings**
Material usage: 40 g per egg

Material: PLA
Print direction: files are rotated correctly
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15%
Build plate adhesion type: none



Photo holder eggs

White_03.stl

Whether you need to manage appliance cords or tidy up messy drawers, these designs offer the perfect solution.

***

**Includes two versions:**

- **Adhesive Cable Winder:** Designed for kitchen appliances (mixers, blenders, etc.). The flexible base allows it to adhere perfectly even to curved surfaces. Simply attach it using double-sided tape and wrap your cord neatly.

- **Drawer Cable Organizer:** The ultimate tool for tidying up loose cables in your desk or junk drawers. Compact and durable, it keeps your charging cables and peripherals tangle-free and easy to access.

***

**Recommended Materials:**
Designed to be printed with flexible materials. Using **PEBA 90A** by eSun or any **TPU / Flexy PLA** is highly recommended. The inherent flexibility of these filaments allows the organizer to conform to curved surfaces and ensures a soft, durable grip on your cables.

***

**Printing Tips:**
- **No supports needed**
- **Recommended infill: 15–20%** (adjust based on desired flexibility).
- **Print with a flexible filament**

***

**OTHER VIDEO & PHOTO**
If you want to see more videos or photos of this design follow me on my [_Instagram_](https://www.instagram.com/af_inventions) or [_TikTok_](https://www.tiktok.com/@af_inventions)!

***

_**COMMERCIAL LICENSE**
Purchasing or downloading this file does not give you the right to sell physical prints of this design.
You can obtain a commercial license for all my designs by signing up to my [_Thangs_](https://than.gs/u/3123610?plans=true)._

CABLE LOOP | FLEXIBLE CABLE ORGANIZERS

CABLE LOOP - VERSION 2.STL

It’s a pretzel! And a fully functioning carabiner! It functions through the natural pretzel shape!

**Features**
- Slip things in on both sides.
- Extra strong - is reinforced internally.
- Prints easily.
- Fuzzy skin & Multicolour 3MF.

**[Commercial licenses available](https://shapeofmike.lemonsqueezy.com/checkout) for selling physical prints!** 

Follow the stories of the making on [Instagram](https://www.instagram.com/much.shape) 

Strictly private use only. Distribution of digital files is not allowed under copyright law in any circumstance. Support small artists by never sharing or selling digital files.

**Comes in two sizes - depending on your appetite**
**Large** -  130mm wide. 7mm gap.
**Small** -  85mm wide. 5mm gap.
**Diferences:** *Besides being shrunk, the small model actually has a wider tolerance gap. Feel free to scale either models as needed.*

Pretzels were hand painted in the photos.

**Disclaimer:** This is a toy. Do not use for rockclimbing or other activities that may endanger the user. The designer is not liable for any and all injuries or damage to property caused through misuse of this product.  

**Enquiries & Support** - Feel free to comment/message here or email hello[at]shapeofmike.com. Allow up to 2 business days for a response due to timezone differences. Would love to hear from you!

Carabiner Pretzel

MUCHshapeofmike Gen1 Pretzel SMALL SALT.stl

Digital Store
Most Popular

Most Popular of All Time

Categories

Popular

Paid & Free Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Gridfinity Nippers + Strippers + Pliers Racks

Pikachu - Pokemon - Fan Art

Raised Multiboard Snap

9x9 MU - Center Grid Interfitted - MultiBoard Octagon Plate

Mario - Super Mario Bros. - Fan Art

DS Snaps - Grip Removal Tool

8x8 Multiboard Corner Legacy Tile

Ironing Stack - Test Print - Key Chain

Collapsing Master Sword (Print-in-place)

Gridfinity Pick + Tweezer Racks

Gridfinity 3D Printing Bundle for Nerds

8x8 Multiboard Side Legacy Tile

Gridfinity Pen, Pencil, and Marker Holders

Stormchunker - FREE Star Wars Stormtrooper Kit | No Supports, No AMS, No Glue

Sword-Saber Test Print

Rails 1x1 - Cargo Connect

Lever action Wallet

Gridfinity Caliper Holder

Snap (DS Part B)

Voronoi Pencil Holder Cup, Office Desk Organizer

Digital StoreMost Popular

Most Popular of All Time

Categories

Popular

Paid & Free Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Gridfinity Nippers + Strippers + Pliers Racks

Pikachu - Pokemon - Fan Art

Raised Multiboard Snap

9x9 MU - Center Grid Interfitted - MultiBoard Octagon Plate

Mario - Super Mario Bros. - Fan Art

DS Snaps - Grip Removal Tool

8x8 Multiboard Corner Legacy Tile

Ironing Stack - Test Print - Key Chain

Collapsing Master Sword (Print-in-place)

Gridfinity Pick + Tweezer Racks

Gridfinity 3D Printing Bundle for Nerds

8x8 Multiboard Side Legacy Tile

Gridfinity Pen, Pencil, and Marker Holders

Stormchunker - FREE Star Wars Stormtrooper Kit | No Supports, No AMS, No Glue

Sword-Saber Test Print

Rails 1x1 - Cargo Connect

Lever action Wallet

Gridfinity Caliper Holder

Snap (DS Part B)

Voronoi Pencil Holder Cup, Office Desk Organizer

Digital Store
Most Popular