Supports
Needed for the drip tray only

Scaling
I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.

Orientation
The main planter is recommended to be printed on the lip/main opening. The insert and drip tray should have their bottoms on the build plate. Mount should be printed on its side, "L" facing the build plate.

Print Settings
Standard settings. May need to shrink drip tray slightly if too tight.

Filament & Hardware
Filament: Any
Command 20 lb X-Large Picture Hanging Strips
Hardware: #10-12 x 1-1/4 in screws
LED, Cork pad, and metal plate linked below.