Headset hook for side of desk

This is a simple headset hook for hanging headset on. There is a screw to tighten the hook to the desk.

The printed parts work just fine alone, but to make things nicer and more secure. You will need the following:

1. 10 mm wide button style rubber bumper/feet
2. suitable flat rubber feet (I used two 12x12mm ones)
3. ziptie (2.5mm wide)
4. retractable lanyard

Assembly instructions:

• Put the round/button bumper at the narrow end of the screw
• Put the flat and wide rubber feet on the top of the desk clamp
• Screw your clamp to your desk, the feet will make a nice solid contact to your desk which secures the hook in place.
• hook the ziptie to the slot at the bottom of the hook and make a loop
• Attach the retractable lanyard to the hook and attack the cable of your headphones to the lanyard.

There are 2 different screws, print the one you like.

Print the both the screw and hook at 0.2mm and with 4 walls.