This is a working model of the wrench from the Create Mod! Check out the mod here: https://www.curseforge.com/minecraft/mc-mods/create

Build instructions attached MOST Parts can be printed with standard settings. I used a .4mm Nozzle and a .16mm layer height The screw and threaded gear should be printed at a .12mm layer height. This will allow the wrench to open and close smoothly

To assemble this model you will need: | ~.75KG of filament - Parts can be easily painted, or you can source each color individually (Links to what I used below) | Glue to attach the parts. I used a 2 part JB weld plastic bonder. I recommend a high strength adhesive, as the wrench is quite top heavy which may stress the joints Recommended: | 12" quick grip clamp or something similar. You may be ok just pushing the parts together, but clamping while the adhesive cures is recommended.

Filament used: Gold (G parts) https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/pla-silk?variant=41126614368392 Red (R parts) https://www.amazon.com/dp/B0BKFNFTKG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Dark Brown (B parts) https://www.amazon.com/dp/B0BM52NN3H?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Tan (T parts) https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/pla-matte-filament?variant=40489682010248 Gray (G parts) https://www.amazon.com/dp/B0B2P265SZ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

(A parts can be any color as they will not be visible in the final model)