tracking pixel
Natalie C

String Biplane: No Supports

by
3dprintbunny
Follow
Follow
Remix Model
millerjy
millerjy
|
|
Image 5 of 13
String Biplane:  No Supports - 100% awesome job.  

I just sent it, trusting it would work on my Anycubic Kobra 2.  .3 layer height.  - 3d model
millerjy
millerjy
|
|
Image 5 of 13
String Biplane:  No Supports - 100% awesome job.  

I just sent it, trusting it would work on my Anycubic Kobra 2.  .3 layer height.  - 3d model
2D
3D
Makes
String Biplane:  No Supports 3d model
String Biplane:  No Supports 3d model
String Biplane:  No Supports 3d model
String Biplane:  No Supports 3d model
String Biplane:  No Supports - 100% awesome job.  

I just sent it, trusting it would work on my Anycubic Kobra 2.  .3 layer height.  - 3d model
String Biplane:  No Supports - Absolutely amazing design! Thank you so much!
Printed at 0.2. - 3d model
String Biplane:  No Supports - epic stl , just like all your others :) - 3d model
String Biplane:  No Supports 3d model
String Biplane:  No Supports 3d model
String Biplane:  No Supports - Printed in @SliceWorx3D TriColor coextrusion blue green orange - 3d model
String Biplane:  No Supports - I tried to make a model in 70%... On prusa slider, 0.28mm, Ender v3... I liked the results.. 😉 - 3d model
String Biplane:  No Supports 3d model
String Biplane:  No Supports - I did it just for fun.
Great design, worked well without supports.
PLA, 0,3mm layer on Prusa Mini+

Many thanks to #3dprintbunny - 3d model
This model is restricted by licensing terms. 

A String Biplane model with spinning propellor and wheels

Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne.

All parts are printed without supports

I found a brim allowed me to print the front file at a faster speed.

To assemble place the 'propellor back' into the 'engine', push the propellor through and screw in place, then screw the engine and propellor into the front of the Biplane.

My Biplane is printed in Geeetech Bronze Rainbow filament which you can find here: https://amzn.to/3KKlZrU

I also have a version with hanging rings attached which you can find here: https://than.gs/m/923028


660 Likes2K DownloadsAugust 18, 2023


660 Likes2K DownloadsAugust 18, 2023
This model is restricted by licensing terms.