Agazzani makes high-quality industrial bandsaws in Italy. But when the table inserts (also called throat plates) get damaged or lost it can be hard to find replacement parts, especially dealing with international shipping.

Eagle Tools gave me an aluminum one and asked if I could make a replacement version in plastic. I told them I thought I could machine an aluminum version, but they said they'd prefer stiff plastic so if the blade nicks it the blade is not damaged. 

The original had M5 set screws for precisely adjusting the height/level from the top, so I tapped this to fit the same screws and they work perfectly.

I originally printed this in ASA, but Eagle asked for a few more so I also printed some in NylonX and PC. I assume would also work fine in PLA, PETG, ABS, TPU, etc.

Includes Fusion360 file.

Bandsaw Table Insert

Agazzani makes high-quality industrial bandsaws in Italy. But when the table inserts (also called throat plates) get damaged or lost it can be hard to find replacement parts, especially dealing with international shipping.

Eagle Tools gave me an aluminum one and asked if I could make a replacement version in plastic. I told them I thought I could machine an aluminum version, but they said they'd prefer stiff plastic so if the blade nicks it the blade is not damaged. 

The original had M5 set screws for precisely adjusting the height/level from the top, so I tapped this to fit the same screws and they work perfectly.

I printed this in ASA, but I think would also work well in ABS, PETG, Nylon, TPU, or PLA.

I've been using these Akro-Mils plastic small parts organizers for 7 years, but I recently re-organized some drawers and needed more dividers. I printed these in ASA but am sure they would work in any filament.

Includes Fusion360 file.

Screw Drawer Divider

For Valentines Day 2023, I made my five year old a plastic heart with her name on it that she could bring for show-and-tell.

Includes Fusion360 file.

Customized Valentine Heart

Sally Heart.stl

The clear plastic cover for the red status LED on our Technivorm MoccaMaster broke. I modeled and printed a replacement part in clear polycarbonate. It is odd shaped because it grips onto an LED that behind the cover is shaped like a small Christmas light. 

Includes Fusion360 file. (I originally made a shallower version which is shown upright on a green cutting mat.)

MoccaMaster LED Cover

In May 2022, my daughter had three 4th-grade friends sleepover so I had them each pick a font and watch a custom keychain print out.

Inspired by several tutorials on YouTube. Includes Fusion360 file.

Name Keychains

My daughter had three friends sleepover so I had them each pick a font and watch a custom keychain print out.

Based on many similar tutorials on YouTube. Includes Fusion360 file.

Grace Keychain

Our kitchen sink came with a stainless steel grid to protect the bottom from scratches. The grid had plastic or rubber feet that eventually wore out and became gross. Lots of websites sell replacement grids, but I couldn't find anywhere that sells just the feet. Luckily they are quite easy to model and print. 

My sink takes 8 feet so I print batches of 16 and just throw the old ones away after six months. I've done them in both natural TPU and black TPE, although I imagine many filaments would work fine.

Includes Fusion360 file.

Sink Grid Feet

Our kitchen sink came with a stainless steel grid to protect the bottom from scratches. The grid had plastic or rubber feet that eventually wore out and became gross. Lots of websites sell replacement grids, but I couldn't find anywhere that sells the feet. Luckily the are quite easy to model and print. 

My sink takes 8 feet so I print batches of 16 and just throw the old ones away after six months. I've done them in both natural TPU and black TPE, although I imagine many filaments would work fine.

Includes Fusion360 file.

My city provides large trash cans for garbage, recycling, and yard waste. One of the pieces that secures the lid to the body broke, which made the lid dangle annoyingly whenever it was opened. Since the city doesn't offer parts, I instead copied the design into Fusion 360 and printed out a replacement in black TPE.

Includes Fusion360 file.

Trash Can Lid Support

Simple utility closet wall hook to hold aprons, mops, etc. I printed this in PETG and it has been holding 5-10lbs with no issue for months. (I also printed a version in NylonX in case the PETG wasn't strong enough, but I haven't needed to use it.)

Includes Fusion360 model.

Apron Hook

In 2016 I wanted to learn Fusion 360, so one of my first projects was a simple extrusion of Make magazine's iconic robot mascot Makey. 

I initially did this just to carve with my Shapeoko3 CNC router from a small block of scrap walnut. Years later I got a 3D printer and updated the file slightly so that I could try it as a two-color print. 

I've also included an STL file for a single-extrusion, which is basically just leaving the eyes hollow, as I did in the original CNC version.

Includes Fusion360 file.

Makey

Makey - Single Extruder.stl

The SawStop Blade Guard includes a 1 ¾" vacuum port, but when not using the Blade Guard (e.g. for narrow cuts), you want to cap that vacuum hose so the suction is not being wasted.

This is just a 1 ¾" (46mm) diameter circle extruded 15mm high. Includes Fusion 360 file.

SawStop Blade Guard Vacuum Cap

Blade Guard Vacuum Cap.3mf

The SawStop Inline Router Table comes with a fence that attaches via a 2 1/2" dust hose to the main 4" dust port under the table. But when not using the fence, a lot of suction gets wasted, so it is useful to cap Y-split of the port.

This is just a 63mm diameter circle extruded 15mm high. Includes Fusion 360 file.

SawStop Router Fence Vacuum Cap

Router Fence Cap.3mf

The SawStop Overarm Dust Collection comes with a 4" dust Y-port to connect the blade guard's smaller vacuum hose into the saw's main dust collection port.
The problem is the design creates very little suction from the blade guard. The other problem (for me) is that because it slips over the saw's built-in dust port, I can no longer clamp a DustRight adapter to it allowing me to easily move my 4" hose to other large tools.
This version solves both problems, adding a scoop into the airflow to increase suction to the blade guard while also being snapped to fit the rubber portion of the DustRight tool port that clamps onto the saw's built-in port.

Includes Fusion360 File

I printed this with 100% infill in ASA plus HIPS supports.

SawStop OverArm DustRight Adapter

The SawStop Overarm Dust Collection comes with a 4" dust Y-port to connect the blade guard's smaller vacuum hose into the saw's main dust collection port.

The problem is the design creates very little suction from the blade guard. The other problem (for me) is that because it slips over the saw's built-in dust port, I can no longer clamp a DustRight adapter to it allowing me to easily move my 4" hose to other large tools.

This version solves both problems, adding a scoop into the airflow to increase suction to the blade guard while also being snapped to fit the rubber portion of the DustRight tool port that clamps onto the saw's built-in port.


SawStop OverArm DustRight.stl

Film producer, amateur wood, metal, and electronics maker, camping and skiing enthusiast, father of three

https://www.automaticprojects.com

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

markmoran

Achievements

Novice Maker

Seedling